As per the current scenario what are the chances of getting in cap for 9 june applicants under NOC 2174
Thanks Century bhai.Century said:No, just give photocopy of FDR and certificate from bank. There is high possibility that VO will ask again for the bank certificate again. So, don't liquidate it.
thanks Century,Century said:I would suggest, writing his both family name and given names in the both of the forms.
Add a cover letter that your father don't use surname but in your marriage certificate it is written there.
Thankx buddy, it worked now.scorpionjot said:- simply right click the link and select "Save as"
- save the document on your pc and then open it.
- it works.
19th August: record of landing (IMM 1000)col123456 said:hello guys
i have received PR visa in FSW 2013
and booked my tickets and will land in toronto 19 th august 2014.
now my question is that my wife's sister want to apply for FSW 2014 as per calculated point she got 63 points without point for adaptability (Relatives in canada). and also there is no alternative way to increase point except this...
Now what documents should i provide to her for claiming her points for relative in canada....
As i will land on 19 th august please suggest me fastest way to collect all the required documnts like
Proof of status
record of landing (IMM 1000) or
confirmation of permanent residence or
permanent resident card.
(out of these three which document issused fastest to claim point.....) plase advice and how to collect that document?????
Proof of residency
Lease agreement (how many days it will take? and ease way to collect)
credit card invoice and bank statement (If i open acc. after landing and provide statment is it sufficient)
Monthly bill (Before month i have to provide to her for putting file)
An employer letter confirming employment (As i dont have job when i land...)
All the above for proof of residency is compulsory or can i show anyone?
And how to collect all these
pplease advice.....
Thanks for the tip and the +1!Century said:you can post it by putting space.
According to spreadsheet, they are the fifth largest. +1 for the information.
Not many from South Africa yet, I see many going to Australia when I sat my IELTS. For me Canada is my first choice!Century said:Right. Philippines surpass India from 2009 and trendwise, they will be number one soon. Both China and India are steady.
Is, it is perfectly OK.rumel said:Thanks Century bhai.
so, if they want the statement of my current account then i can submit my FDR documents and bank certificate. is it correct?
will FDR information come in bank statement ??
thanks +1 for uCentury said:Is, it is perfectly OK.
FDR information come in bank statement: No, not necessarily.
Again repeating, the FDR you will make today, don't liquidate it before landing.
thanks. +1 for uCentury said:Is, it is perfectly OK.
FDR information come in bank statement: No, not necessarily.
Again repeating, the FDR you will make today, don't liquidate it before landing.
It is fair enough. Don't think, there will be any issue on job description.pj2133 said:Hi All,
Good see everyone helping each other
I have a query related to my Job duties in reference letter, I am basically a electronics hardware engineer and applied under NOC 2133, my file reached at 21 may. NOC 2133 is for electrical and electronics engineer but here in India both are different like their are either electronics engineers or electrical engineers and I am a electronics and communication engineer, so here my confusion starts... I understand education is not that important for FSW but its your job duties.
So I am pasting the both the standard Job duties for NOC 2133 as per HRSDC and duties in my referrer letter
1) Duties as per HRSDC NOC 2133
2133 Electrical and electronics engineers
Electrical and electronics engineers design, plan, research, evaluate and test electrical and electronic equipment and systems. They are employed by electrical utilities, communications companies, manufacturers of electrical and electronic equipment, consulting firms, and by a wide range of manufacturing, processing and transportation industries and government.
Example Titles
avionics engineer
control systems engineer
design engineer, electrical
distribution planning engineer, electrical
electrical engineer
electrical network engineer
electronics engineer
instrumentation and control engineer
planning engineer, electrical systems
process control engineer, electrical
roadway lighting design engineer
television systems engineer
test engineer, electronics
View all titles
Main duties
Electrical and electronics engineers perform some or all of the following duties:
Conduct research into the feasibility, design, operation and performance of electrical generation and distribution networks, electrical machinery and components and electronic communications, instrumentation and control systems, equipment, and components
Prepare material cost and timing estimates, reports and design specifications for electrical and electronic systems and equipment
Design electrical and electronic circuits, components, systems and equipment
Conduct micro or nanodevices simulations, characterization, process modeling and integration in the development of new electronic devices and products
Supervise and inspect the installation, modification, testing and operation of electrical and electronic systems and equipment
Develop maintenance and operating standards for electrical and electronic systems and equipment
Investigate electrical or electronic failures
Prepare contract documents and evaluate tenders for construction or maintenance
Supervise technicians, technologists, programmers, analysts and other engineers.
Electrical and electronics engineers may specialize in a number of areas including electrical design for residential, commercial or industrial installations, electrical power generation and transmission, and instrumentation and control systems.
2) My Reference letter
TO WHOMSOEVER IT MAY CONCERN
This is to certify that Mr. XXX was working with YYY Ltd. as an R & D Engineer from 16th June 2006 to 29th September 2007 and he rejoined as an Engineer and worked with us form 2nd April 2012 to 15th March 2013. During his both the tenures he was a full time employee and worked eight hours per day and six days per week (Monday to Saturday).
Salary Information
16th June 2006 to 31st March 2007 : Rs. x per Month
1st April 2007 to 29th September 2007 : Rs. y per Month
2nd April 2012 to 15th March 2013: Rs. z per Month
In our organization he was responsible to perform following duties in different Phases of electronics design, development and manufacturing of RFID technology based products:
Proposal Phase
Preparing Pitch presentation
Preparation of Proposals, Work Contract & Statement of Work
Evaluating the tenders and participating
Derive the time estimations of the project
Research Phase
Requirement gathering and Analysis
Preparing the Requirement & functional specification documents
Research on different features of the product like stability, performance, self life of the electronics components, communication interfaces like USB, Ethernet or Serial
Execute POC (Proof of Concept) for testing the feasibility of the overall product or for any crucial feature of the product.
Carry out applied research in fields of electrical and electronic engineering and physics under the direction of scientists or engineers
Design Phase
Design the overall System architecture
Prepare the design specification document
Prepare the Bill of Material for all the electronic components and accessories like PCB, cables, connectors etc
Design the Schematics/Circuit diagram for the electronics of the product
Design the PCB(Printed Circuit Board) layout and generate the Gerber files
Conducting the Simulations of newly designed Schematics/Circuits and layouts on different simulation tools
Conduct design review
Implementation Phase
Vendor development for purchase of different electronics components
Coordinating for PCB fabrication and electronics component Assembly
Testing Phase
Operate specialized and standard test equipment to diagnose, test and analyze the performance of electrical and electronic components, assemblies and systems.
Preparation of Test scenario and test cases
Execute the testing of the electronics product
Conduct the field trials
Identify the failure and further investigate for the root cause of the failure.
Rectify the design to avoid any failures
Enforce quality control norms and procedures
Installation and Client Support
Supervise and Coordinating the installation of the product at client site (Field)
Ensure timely availability of material, manpower, clearance of local problems for completion of projects on time
Conduct the initial dry run tests at client site
Provide Client support any of queries or failures
He supervised Engineers, technicians and other technologists, gave suggestions, review/approve cost and efforts estimates and design.
We have been found him capable, diligent and sincere in performing all above duties.
Sincerely,
I am really worried whether they will consider this or not as seeing many application is returned due to job duties, Please want some expert comments on this.
In my one it appeared asFromDrToCanada said:Can anyone tell me exactly how does Credit Charges by CIC appears on the credit card statement? I want to be as specific as possible with my Bank regarding the name of the institution that's going to request the charge.
Regards,
+1 for sharing.barako1 said:In my one it appeared as
CITIZENSHIP & IMM FSW,SYDNEY