FSW 2014 Applicants Timeline- Lets Network Here.

[pravin16]

Friends who have send their medical and RPRF, i have one question?

Yesterday I had my medical exam. They told me that the medical will be send by them online within friday,that is tomorrow and one copy will be send to me on mail by next wednesday. . I also made bank draft of 53,400 for me and my spouse.
Now i want to know that do i also have to send the separe medical that i wii receive on mail within wednesday or shall i send my RPRF bank draft, along with bio page of passport and the request letter they have send to me??????

Where did u do medical and what was the cost for family of 3. What tests they do for 5 yrs old children. In DD you mentioned 2×490 $ or in NRS.

 

[shukan81]

Guys I have asked it earlier but no one answered...

What happens after CC charge? do CIC communicate via email ?

Only communication is at the time receiving PER or NER....

 

[kldpptl]

I have applied on 10 July 2014 from India
App received on 16th july 2014
CC charged on 1st November 2014

But i havent received PER email yet. Can anybody brief me approx what duration we receive email.

 

[can2132]

Hey Guys, I sent a mail to NDVO for verifying whether my PCC and RPRF has been received at your office.

Below is the reply:-

Dear Sir/Madam,

This is in response to your recent email enquiry to the Immigration Section of the Canadian High Commission in New Delhi.

Please be advised that the RPRF and PCCs are received at our office. The file is pending final review. At present no action is required on your part. Once the review is complete, our office will contact you with further instructions.

We trust that this information will be of assistance.

hi dear
when did you send them an email?
and how many days did they take to reply to your query?
i have also sent an email yesterday regarding my medical results so don't know how much time will they take

 

[CanadianLov3]

September applicants in celebration mood now
Latest CC Charged: 4 Sept
Latest DD encashed: 1 Aug (but also 13 Aug reported on the forum but not confirmed yet)
Latest PER:25 July

+1 for your regular updates, thank you!

 

[rameez748]

Congrats +1, ECAS will be updated shortly, pls update SS, thanks

I have lost my Link...

can anyone update my data ?

MR on 20/11/2014 from NDVO without second line.

 

[can2132]

Does HDFC informs if DD is encashed or not?
I tried to contact HDFC bank but they are saying they dont know how to check it?
How is it possible?
I am confused..

yes they do reply for your DD transaction
if its for RPRF then They immediately let you know by giving them your DD number and date of transaction as it is in INR
But if its in CAD at CPC- Nova Scotia then they will take 8-10 days

 

[ghantsi]

CC has been charged at last.
I was tensed due to too many erratic cc charging. Finaly mine charged.
Application received by CIC: 20 aug 2014
NOC-3112
CC charged-- 20 nov 2014
Mistakes: For my 2 yrs old daughter I wrote dependent type A which should be type 1 from august 1st. Later sent the updated form.
Will update SS later.
Thanks to all forum members. Your dicussion has helped me a lot.

 

[captain FK]

Re posting..... Need an advice to act before the water runs over my head....

Dear Holic,

I have submitted the LOR very much inline with what you have suggested. And very happy to receive the concrete reply.

+1 to you bro...

Duties included in my letter are as follows:

Kindly review the same and please give me your opinion that will that suffice the need of CIC?

• From 5th July.2010 to 2nd March.2014 – Production Planning and Control Department

Responsibilities as a Project Planning Engineer:

1. Conduct feasibility test for the delivery of the projects (Tool - Capacity or Resource Planning)
2. Develop project and production schedules (Tool - MS PROJECT)
3. Execute material requirement planning (MRP) in-line with the project schedule (Tool - SAP)
4. Track and control the project execution (Tool - S-Curve)
5. Develop MIS reports for the projects (e.g. Project Progress Report, Material Procurement Status)

• From 3rd March.2014 to till date – Export Marketing Department

Responsibilities as an Export Marketing Engineer:

1. Prepare cost and timing estimates for the projects
2. Prepare and negotiate technical and commercial bids for the projects
3. Prepare, negotiate, and finalize the contract documents and evaluate tenders for manufacturing of Power Equipment.

[size=10pt]Anticipating answers from the NOC 2132 applicants.[/size]

dear friend,
your JD is almost fine . If you havent submitted yet - I would like to suggest that you prepare two applications: one for 2132 and other for 0911 because your JD is partially matching with both... this is because 2132 would be gone if u r applying right now but 0911 is still very much in reach.

 

[maverick83]

My CC was charged on 27th October but have not received PER still
Application received date 9th July 2014
VO is New Delhi
2173
Are there any one in similar scenario? Why is it taking so long?

 

[NSharawat21]

Thanks buddy i will do the same

Try and first get a chest x-ray from your local doctor before going to the DMP...just to be assured....How I wish someone had advised me to do that...coz i took a week's medication after my chest x-ray with the DMP last week, and the chect infection has gone now...but alas...got to wait for 3 months...go through all these tests and spend close to INR 10000 on all these additional tests...

 

[garuna]

Where did u do medical and what was the cost for family of 3. What tests they do for 5 yrs old children. In DD you mentioned 2×490 $ or in NRS.

Medical done : Nepal international clinic
Cost for 3: 12705 ( your will be little bit higher because of 5 years old child) mine was 2.5yrs and there is a range.
For 5 years child, Just physical check up

I made draft in Indian currency for 53400.

 

[Satya123123]

I am 11th Sept Applicant and now my wife has got her new passport with her personal details changed:
1. Change in Surname
2. Change in Address
3. Addition of Spouse name (as someone told me to include these things as priority)

All the docs are submitted to CIC based on her older passport. How to inform this to CIC or NDVO?

Do I need to fill all CIC forms again and submit them due to change of her surname? If yes, then when.

CIC has already completed my completeness check as sept applications have started getting their CC charged.

Kindly help.
Thanks

 

[tech2015]

Re posting..... Need an advice to act before the water runs over my head....

Dear Holic,

I have submitted the LOR very much inline with what you have suggested. And very happy to receive the concrete reply.

+1 to you bro...

Duties included in my letter are as follows:

Kindly review the same and please give me your opinion that will that suffice the need of CIC?

• From 5th July.2010 to 2nd March.2014 – Production Planning and Control Department

Responsibilities as a Project Planning Engineer:

1. Conduct feasibility test for the delivery of the projects (Tool - Capacity or Resource Planning) here also feasibility is to be done before launching the project that means IRR & NSR related study based on initial budgetary figures, and what u are telling it is follow up after project launch
2. Develop project and production schedules (Tool - MS PROJECT) it is ok
3. Execute material requirement planning (MRP) in-line with the project schedule (Tool - SAP) This like u r sending material to project execution team

4. Track and control the project execution (Tool - S-Curve) are you making S curve through MS project and analyzing the CPM, it is like ur first responsibility

5. Develop MIS reports for the projects (e.g. Project Progress Report, Material Procurement Status)

• From 3rd March.2014 to till date – Export Marketing Department

Responsibilities as an Export Marketing Engineer: ( this exp look like mix of techno commercial activity & contract finalization with vendor/ consulatnts and also ur role name and responsibilities are looks different , I can say u are trying to match with project planning engr , if I m not wrong

1. Prepare cost and timing estimates for the projects
2. Prepare and negotiate technical and commercial bids for the projects
3. Prepare, negotiate, and finalize the contract documents and evaluate tenders for manufacturing of Power Equipment.

[size=10pt]Anticipating answers from the NOC 2132 applicants.[/size]

This is all my comments in RED colour for a Project person with Mechanical engineering

 

[neel-here]

@Incanada,

Sry to read about their betrayal
Did they mention in NER mail that they'll refund you the Processing fee iin 2 to 16 weeks ?

KINDLY SHARE YOUR NER MAIL, if poss .

Thks

it will take 2 to 16 weeks
They will credit it back for sure.

I was july 18th applicant..applied within canada under noc 2174
cc charged : nov 7
Yesderday i got ner saying cap reached .so frankly dont hope