Guys just wanted to have clarification regarding photo specification. A lot of PR Card photos are getting rejected. I plan to land, apply for PR card and then leave after a few days so I don't want the hassle of having my PR photos rejected. I've done some searching on this forum and have come up with these details:
Besides the passport size photos (which are much larger, I'm not going to talk about those here), the standard photo "frame size" is 35mm by 45mm (1 3/8" to 1 3/4"). However there are three variations of head size for this frame size:
- When I applied for FSW app to VO the very first time, I used these specs:
http://www.cic.gc.ca/english/information/applications/guides/EG7A.asp
This page has a problem. The text says the head size should be between 25 mm and 35 mm (1” and 1 3/8”). But the photo illustration has a marking of head size between 25mm and 30mm (1" and 1 1/5")
- When we get PPR, we have to submit passport with photos that have visa photo specs:
http://www.cic.gc.ca/english/information/applications/photospecs.asp
Here the head size is between 31mm and 36mm (1 1/4" to 1 7/16")
(Correction, thanks to zulkfal: Buffalo VO doesn't request these specs; they request the PR Card specs ... so your VO may also have a different requirement depending upon what you get in PPR)
- Finally, when we land, we're supposed to use following specs for PR card photos (to give to the immigration officer):
http://www.cic.gc.ca/english/information/applications/guides/5445EB.asp
Here the head size is between 25mm and 30mm (1" and 1 1/5"). Same as in the photo illustration for FSW Appendix A (the first case above)
Seniors, members, correct me if I'm wrong and feel free to comment!
P.S.: photos could still be rejected for other reasons (smiling/frowning, tilted head, not clear, etc etc, but I guess those are easier to handle)
Besides the passport size photos (which are much larger, I'm not going to talk about those here), the standard photo "frame size" is 35mm by 45mm (1 3/8" to 1 3/4"). However there are three variations of head size for this frame size:
- When I applied for FSW app to VO the very first time, I used these specs:
http://www.cic.gc.ca/english/information/applications/guides/EG7A.asp
This page has a problem. The text says the head size should be between 25 mm and 35 mm (1” and 1 3/8”). But the photo illustration has a marking of head size between 25mm and 30mm (1" and 1 1/5")
- When we get PPR, we have to submit passport with photos that have visa photo specs:
http://www.cic.gc.ca/english/information/applications/photospecs.asp
Here the head size is between 31mm and 36mm (1 1/4" to 1 7/16")
(Correction, thanks to zulkfal: Buffalo VO doesn't request these specs; they request the PR Card specs ... so your VO may also have a different requirement depending upon what you get in PPR)
- Finally, when we land, we're supposed to use following specs for PR card photos (to give to the immigration officer):
http://www.cic.gc.ca/english/information/applications/guides/5445EB.asp
Here the head size is between 25mm and 30mm (1" and 1 1/5"). Same as in the photo illustration for FSW Appendix A (the first case above)
Seniors, members, correct me if I'm wrong and feel free to comment!
P.S.: photos could still be rejected for other reasons (smiling/frowning, tilted head, not clear, etc etc, but I guess those are easier to handle)