Hi Guys,
I am all set to apply under NOC B (7231) Setup Machinist..According to HRSDC Website The Duties are as follows
-Read and interpret engineering drawings, blueprints, charts and tables or study sample parts to determine machining operation to be performed, and plan best sequence of operations
-Compute dimensions and tolerances and measure and lay out work pieces
-Set up, operate and maintain a variety of machine tools including computer numerically controlled (CNC) tools to perform precision, non-repetitive machining operations such as sawing, turning, milling, boring, planing, drilling, precision grinding and other operations
-Fit and assemble machined metal parts and subassemblies using hand and power tools
-Verify dimensions of products for accuracy and conformance to specifications using precision measuring instruments
-May set up and program machine tools for use by machining tool operators.
My Case is like this:
Started Working through employmeny agency- July 16, 2013
Hired in same company with same position - October 2013 till now
CElpip REsults - W7, S7, L6, R5
Got Reference letters from
Employment agency---
To Whom It May Concern:
This letter is written as reference for Mr. Harpal Singh with “Teamwork placement Inc.” from July 16, 2103 to October 18, 2103 at our client BMP as a Setup Machinist where he was hired on full time basis, his pay rate was $13.50 per hour based on 42 hours' work week. His duties as per the position mandate by the client included but not limited to Setting up CNC, Punch Press & milling machines, Read and interpret work orders and verify machined parts for accurate dimensions using precision measuring instruments including Vernier Caliper, measuring tapes and depth gages etc.
We have observed Mr. Singh to be very conscientious and caring; he is very reliable, punctual and conducts himself in a professional manner. Mr. Singh brought a very high level of responsibility, dedication and work ethic to the job.
Mr. Singh valued skill was a benefit to our firm and our clients, I can without hesitation recommend Mr. Singh. If any further information is required, please contact me.
Yours Truly,
General manager
From My Company:
To Whom It May Concern:
Re: xxxx
This letter is to confirm the employment of Mr. xxxx with “BMP.” in the capacity of Setup Machinist (National Occupational Classification Code 7231) as well as variety of other procedures required by the metal manufacturing industry.
The duties and responsibilities performed by Harpal Singh are as follows but not necessarily limited to:
• Studies and interprets engineering drawings, blueprints, work orders, specifications or sample parts to determine machining process needed.
• Perform complex setups, maintain the machinery and load tools into CNC and other machines in a definite sequence to perform operations like milling, drilling, punch press, sawing, bending, turning and precision grinding
• Responsible to verify the machined parts for accurate dimensions using precision measuring instruments like measuring tape, Digital and Vernier caliper, Depth Gages to maintain accuracy.
• Assemble the parts together to assure a perfect fit in weld fixtures.
• Mark dimensions and reference points on material or work pieces as a guide for subsequent machining
• Responsible to detect equipment malfunctions or out of tolerance machining and perform minor program edits at CNC or other machines to assure that parts conform to engineering prints or process quality.
• Perform maintenance schedule on weekly basis and inspect tools for sharpness and usability.
• Check volume and verify parts before sending them to next department.
Mr. Xxx started working with the company as a Set up Machinist on July 16, 2013 through our placement contractor “Teamwork Placement Inc.” on full-time basis. He was then hired as a permanent employee of “BMP.” at the same position on October 21, 2013. He proved himself to be a definite asset to this company. He is very conscientious as well as shows an interest to upgrade himself in every avenue of the metal manufacturing process.
As a full time employee, he works a minimum of 42 hours per week and his remuneration is set at $16 per hour. His annual base salary (based on 42 hours' work week) is 34,944.00 annually with additional benefits including 2 weeks of paid holidays every year, extended health plan and dental plan for the year ended 2014.
If you have any concerns related to his employment, please feel free to contact me by email or at the numbers provided.
Yours truly,
Production Manager, BMP
I am going to apply on friday this week. Please dont hesitate to correct me guys. I wiil be very thankful to all of you.
I am all set to apply under NOC B (7231) Setup Machinist..According to HRSDC Website The Duties are as follows
-Read and interpret engineering drawings, blueprints, charts and tables or study sample parts to determine machining operation to be performed, and plan best sequence of operations
-Compute dimensions and tolerances and measure and lay out work pieces
-Set up, operate and maintain a variety of machine tools including computer numerically controlled (CNC) tools to perform precision, non-repetitive machining operations such as sawing, turning, milling, boring, planing, drilling, precision grinding and other operations
-Fit and assemble machined metal parts and subassemblies using hand and power tools
-Verify dimensions of products for accuracy and conformance to specifications using precision measuring instruments
-May set up and program machine tools for use by machining tool operators.
My Case is like this:
Started Working through employmeny agency- July 16, 2013
Hired in same company with same position - October 2013 till now
CElpip REsults - W7, S7, L6, R5
Got Reference letters from
Employment agency---
To Whom It May Concern:
This letter is written as reference for Mr. Harpal Singh with “Teamwork placement Inc.” from July 16, 2103 to October 18, 2103 at our client BMP as a Setup Machinist where he was hired on full time basis, his pay rate was $13.50 per hour based on 42 hours' work week. His duties as per the position mandate by the client included but not limited to Setting up CNC, Punch Press & milling machines, Read and interpret work orders and verify machined parts for accurate dimensions using precision measuring instruments including Vernier Caliper, measuring tapes and depth gages etc.
We have observed Mr. Singh to be very conscientious and caring; he is very reliable, punctual and conducts himself in a professional manner. Mr. Singh brought a very high level of responsibility, dedication and work ethic to the job.
Mr. Singh valued skill was a benefit to our firm and our clients, I can without hesitation recommend Mr. Singh. If any further information is required, please contact me.
Yours Truly,
General manager
From My Company:
To Whom It May Concern:
Re: xxxx
This letter is to confirm the employment of Mr. xxxx with “BMP.” in the capacity of Setup Machinist (National Occupational Classification Code 7231) as well as variety of other procedures required by the metal manufacturing industry.
The duties and responsibilities performed by Harpal Singh are as follows but not necessarily limited to:
• Studies and interprets engineering drawings, blueprints, work orders, specifications or sample parts to determine machining process needed.
• Perform complex setups, maintain the machinery and load tools into CNC and other machines in a definite sequence to perform operations like milling, drilling, punch press, sawing, bending, turning and precision grinding
• Responsible to verify the machined parts for accurate dimensions using precision measuring instruments like measuring tape, Digital and Vernier caliper, Depth Gages to maintain accuracy.
• Assemble the parts together to assure a perfect fit in weld fixtures.
• Mark dimensions and reference points on material or work pieces as a guide for subsequent machining
• Responsible to detect equipment malfunctions or out of tolerance machining and perform minor program edits at CNC or other machines to assure that parts conform to engineering prints or process quality.
• Perform maintenance schedule on weekly basis and inspect tools for sharpness and usability.
• Check volume and verify parts before sending them to next department.
Mr. Xxx started working with the company as a Set up Machinist on July 16, 2013 through our placement contractor “Teamwork Placement Inc.” on full-time basis. He was then hired as a permanent employee of “BMP.” at the same position on October 21, 2013. He proved himself to be a definite asset to this company. He is very conscientious as well as shows an interest to upgrade himself in every avenue of the metal manufacturing process.
As a full time employee, he works a minimum of 42 hours per week and his remuneration is set at $16 per hour. His annual base salary (based on 42 hours' work week) is 34,944.00 annually with additional benefits including 2 weeks of paid holidays every year, extended health plan and dental plan for the year ended 2014.
If you have any concerns related to his employment, please feel free to contact me by email or at the numbers provided.
Yours truly,
Production Manager, BMP
I am going to apply on friday this week. Please dont hesitate to correct me guys. I wiil be very thankful to all of you.
