FSW 2013 - NOC 2132 MIGHTY MECHANICAL ENGINEERS PLZ CONNECT HERE

[Go-Canada-Go]

FSW 2013 APPLICANTS IN NOC 2132 MECHANICAL ENGINEERS WHO ARE CURRENTLY PREPARING DOCS SHOULD SUBMIT THEIR APPLICATIONS AS SOON AS POSSIBLE AS IT IS QUITE LIKELY THE CAP IN NOC 2132 MAY BE REACHED SOON, MAY BE WITHIN THE NEXT 6 DAYS.

!SO SAD TO HEAR CAP IS BEEN FILLED!!!!

 

[rawdah]

!SO SAD TO HEAR CAP IS BEEN FILLED!!!!

When will you be submitting your application?

 

[rahul2132]

Its very sad to see that NOC 2132 reached 300 cap very quickly.

 

[dipiie]

Hi buddies! This is my profile

Mechanical design engineer

NOC: 2132
Visa Office: London
IELTS Bands: 7.5
Self Calculated Points: 79
Spouse IELTS included: Yes
Relatives in Canada: Yes
Job Offer: No
Degree: Bachelors in Mechanical Engineering
ECA Equivalence: same
Job Experience: 4
PCC Sent: Yes
Application Sent.....: 04-06-2013

 

[Prince DXB]

Its very sad to see that NOC 2132 reached 300 cap very quickly.

All guesses.....nothing official.....!!!

 

[Prince DXB]

!SO SAD TO HEAR CAP IS BEEN FILLED!!!!

Dont loose hope u dont know how many of them r not complete and might get rejected....so still give it a shot....

 

[dhlee]

I sent my application to CIO and it's delivered on 30th May.
I didn't expect I was too late but when I saw all posts related 2132(machenical engineer) today, I was so sad because somebody said 2132 is already reached over 300.
Is it true? ???


Mechanical design engineer

NOC: 2132
Visa Office: Korea
IELTS Bands: 6.5
Self Calculated Points: 70
Spouse IELTS included: Yes
Relatives in Canada: No
Job Offer: No
Degree: Bachelors in Mechanical Engineering
ECA Equivalence: same
Job Experience: 4
PCC Sent: Yes
Application Sent.....: 27-05-2013 (Delivered to CIO 30-05-2013)

 

[rahul2132]

I sent my application to CIO and it's delivered on 30th May.
I didn't expect I was too late but when I saw all posts related 2132(machenical engineer) today, I was so sad because somebody said 2132 is already reached over 300.
Is it true? ???


Mechanical design engineer

NOC: 2132
Visa Office: Korea
IELTS Bands: 6.5
Self Calculated Points: 70
Spouse IELTS included: Yes
Relatives in Canada: No
Job Offer: No
Degree: Bachelors in Mechanical Engineering
ECA Equivalence: same
Job Experience: 4
PCC Sent: Yes
Application Sent.....: 27-05-2013 (Delivered to CIO 30-05-2013)

I am also concerned about the cap because I applied after you. According to spreadsheet there are 425 applications on NOC 2132. Till now there is no official announcement from CIC regarding cap. Wish all our applications are within the cap limit. Please update your details in the spreadsheet link below. Thank you

http://www.canadavisa.com/canada-immigration-discussion-board/fsw-2013-applicants-timeline-lets-network-here-t146774.3120.html

 

[MR GRAVITY]

THESE OCCUPATIONS DOESN'T COME UNDER NOC 2132 MECHANICAL ENGINEERS



BE-CAREFUL BEFORE APPLYING UNDER NOC 2132 AND CROSS CHECK YOUR DESIGNATIONS/ROLES/RESPONSIBILITIES/DUTIES WHETHER THEY FIT UNDER NOC 2132 OR NOT AND APPLY. I AM POSTING ONLY SOME NOC'S THAT DOESN'T FALL UNDER NOC 2132. THANK YOU

YOU CAN ALSO CROSS CHECK AT http://www30.hrsdc.gc.ca/NOC/English/NOC/2006/QuickSearch.aspx?val65=*


2141 Industrial and manufacturing engineers

Industrial and manufacturing engineers conduct studies, and develop and supervise programs to achieve the best use of equipment, human resources, technology, materials and procedures to enhance efficiency and productivity. Industrial and manufacturing engineers are employed in consulting firms, manufacturing and processing companies, in government, financial, health care and other institutions, or they may be self-employed.

• CIM (computer integrated manufacturing) engineer
• computer integrated manufacturing (CIM) engineer
• consulting industrial engineer
• cost engineer
• efficiency engineer
• engineer, computer integrated manufacturing (CIM)
• engineer, manufacturing
• fire prevention engineer
• industrial efficiency engineer
• industrial engineer
• industrial safety engineer
• manufacturing engineer
• methods engineer
• plant engineer
• production engineer
• QA (quality assurance) engineer
• quality assurance (QA) engineer
• quality control engineer
• safety engineer
• systems engineer – manufacturing
• time-study engineer
• work measurement engineer

Main duties

Industrial and manufacturing engineers perform some or all of the following duties:
• Plan and design plant layouts and facilities
• Study new machinery and facilities and recommend or select efficient combinations
• Develop flexible or integrated manufacturing systems and procedures
• Conduct studies and implement programs to determine optimum inventory levels for production and to allow optimum utilization of machinery, materials and resources
• Analyze costs of production
• Design, develop and conduct time studies and work simplification programs
• Determine human resource and skill requirements and develop training programs
• Develop performance standards, evaluation systems and wage and incentive programs
• Conduct studies of the reliability and performance of plant facilities and production or administrative systems
• Develop maintenance standards, schedules and programs
• Establish programs and conduct studies to enhance industrial health and safety or to identify and correct fire and other hazards
• Evaluate or assess industrial facilities
• Supervise technicians, technologists, analysts, administrative staff and other engineers.





2233 Industrial engineering and manufacturing technologists and technicians

Industrial engineering and manufacturing technologists and technicians may work independently or provide technical support and services in the development of production methods, facilities and systems, and the planning, estimating, measuring and scheduling of work. They are employed by manufacturing and insurance companies, government departments, and establishments in other industries.

• 3D CNC (computer numerical control) programmer
• CAD/CAM (computer-aided design/computer-assisted manufacturing) programmer
• CAD/CAM NC (computer-aided design/computer-aided manufacturing, numerical control) programmer
• CAD/CAM programmer
• CNC (computer numerical control) Mastercam programmer
• CNC (computer numerical control) programmer
• CNC (computer numerically controlled) technologist
• CNC/CMM (computer numerically controlled coordinate measuring machine) programmer
• computer numerical control (CNC) Mastercam programmer
• computer numerically controlled coordinate measuring machine (CNC/CMM) programmer
• computer-assisted design/computer-assisted manufacturing (CAD/CAM) programmer
• cost estimator, manufacturing
• fabric design technologist
• fire protection technician – manufacturing
• industrial engineering analyst
• industrial engineering technician
• industrial engineering technologist
• injection moulding technician
• inventory control technician
• loss prevention technologist – manufacturing
• manufacturing cost estimator
• manufacturing technician
• manufacturing technician – industrial engineering
• manufacturing technologist
• materials handling technician
• methods designer
• NC (numerical control) programmer
• numerically controlled machine tool programmer (except operators)
• numerically controlled tool programmer
• operations research technologist
• planning technician
• plant layout technician
• plastics manufacturing technician
• plastics moulding technician
• plastics technician
• production and quality control technologist
• production control technologist
• production planning technician
• production technologist – sawmill
• programmer, CAD/CAM (computer-assisted design/computer-assisted manufacturing)
• programmer, CAD/CAM NC (computer-aided design/computer-aided manufacturing, numerical control)
• programmer, CNC (computer numerical control) Mastercam
• programmer, CNC/CMM (computer numerically controlled coordinate measuring machine)
• programmer, computer numerical control (CNC) Mastercam
• programmer, computer numerically controlled coordinate measuring machine (CNC/CMM)
• programmer, computer-aided design/computer-aided manufacturing, numerical control (CAD/CAM NC)
• programmer, computer-assisted design/computer-assisted manufacturing (CAD/CAM)
• pulp and paper manufacturing technologist
• pulp and paper technician
• pulp and paper technologist
• quality assurance technologist
• quality control technician (except chemical)
• quality control technologist – industrial engineering
• quality control technologist (except chemical)
• scheduling technician – manufacturing
• technician, industrial engineering
• technician, manufacturing
• technician, planning
• technician, plastics
• technician, pulp and paper
• technician, textile
• technologist, industrial engineering
• technologist, manufacturing
• technologist, pulp and paper
• technologist, quality control – industrial engineering
• technologist, textile
• textile technician
• textile technologist
• time study analyst
• time study technologist
• tool programming technologist


Main duties

Industrial engineering and manufacturing technologists perform some or all of the following duties:
• Develop and conduct production, inventory and quality assurance programs in manufacturing or in other industries
• Design plant layouts and production facilities
• Develop and carry out work study and related programs
• Develop and carry out industrial health, safety and fire prevention plans and programs and conduct safety training programs
• Develop applications using CAD/CAM (computer-assisted drafting, computer-assisted manufacturing) for the control of robots, computer numerical control (CNC) machines and other manufacturing processes and operations.

Industrial engineering and manufacturing technicians perform some or all of the following duties:
• Assist in the design of plant layouts
• Conduct work measurement or other studies
• Collect and compile operational or experimental data and assist in the development of estimates, schedules, specifications and reports
• Collect and analyze data and samples in support of quality assurance and industrial health and safety programs
• Develop manufacturing and processing procedures and variables, set machine or equipment controls, oversee production and inspect processes.

Technologists and technicians in this unit group may specialize in the development of production processes, quality assurance programs, plans and schedules in a particular industrial area such as metal fabrication, plastics, pulp and paper, or textile manufacturing.




0911 Manufacturing managers

Manufacturing managers plan, organize, direct, control and evaluate the operations of a manufacturing establishment or of a production department within a manufacturing establishment, under the direction of a general manager or other senior manager. They are employed by manufacturing companies.

• automobile interior fittings production manager
• automobile production manager
• brewmaster
• business manager – manufacturing
• cannery manager
• clothing factory manager
• container manufacturing manager
• co-ordinator, production planning
• dairy plant manager
• director of operations, manufacturing
• distillery manager
• enologist
• factory superintendent
• field director – manufacturing
• fish-processing plant manager
• flour mill manager
• food and beverage production manager
• food production manager
• food-processing plant manager
• foundry manager
• furniture factory manager
• industrial and manufacturing production manager
• logistics manager – manufacturing
• lumber mill manager
• manager, distillery
• manager, flour mill
• manager, manufacturing
• manager, manufacturing company
• manager, manufacturing industry
• manager, metalworks fabrication
• manager, mill
• manager, operations – manufacturing
• manager, paper mill
• manager, plant
• manager, printing
• manager, production operations
• manager, quality-control services
• manager, railway rolling stock production
• manager, steel mill
• manager, textile mill
• manager, textile spinning mill
• manager, textile spinning plant
• manager, tire plant
• manager, tool production department
• manufacturing company manager
• manufacturing industry manager
• manufacturing manager
• manufacturing operations manager
• manufacturing plant manager
• manufacturing plant superintendent
• metal works fabrication manager
• mill manager
• mill manager, textile spinning
• mill superintendent
• motor vehicle assembly plant manager
• oenologist
• operations manager – manufacturing
• operations manager – public utilities
• operations manager, manufacturing
• packaging manufacturing plant manager
• paper mill manager
• pickling plant manager
• plant assistant manager
• plant manager
• plant manager, manufacturing
• plant manager, motor vehicle assembly
• plant manager, packaging manufacturing
• plant manager, pickling
• plant manager, plastic products manufacturing
• plant manager, printing
• plant manager, rubber products manufacturing
• plant manager, textile spinning
• plant superintendent, manufacturing
• plastic products-manufacturing plant manager
• printing manager
• printing plant manager
• production chief
• production head
• production manager – manufacturing
• production manager – printing
• production manager, automobile interior fittings
• production manager, railway cars
• production manager, railway rolling stock
• production operations manager
• production planner
• production planning co-ordinator
• production planning manager
• production senior co-ordinator
• production superintendent
• pulp and paper mill manager
• quality-control services manager
• railway car production manager
• railway rolling stock production manager
• refinery superintendent
• rubber products-manufacturing plant manager
• steel mill manager
• superintendent, factory
• superintendent, mill
• superintendent, production
• superintendent, refinery
• textile mill manager
• textile spinning-mill manager
• textile spinning-plant manager
• tire plant manager
• tool production department manager
• winery manager


Main duties

Manufacturing managers perform some or all of the following duties:
• Plan, organize, direct, control and evaluate the operations of a manufacturing establishment or the operations or production department of a manufacturing establishment
• Develop and implement plans to efficiently use materials, labour and equipment to meet production targets
• Plan and manage the establishment of departmental budget
• Develop production schedules and maintain an inventory of raw materials and finished products
• Plan and implement changes to machinery and equipment, production systems and methods of work
• Direct quality control inspection system and develop production reporting procedures
• Develop equipment maintenance schedules and recommend the replacement of machines
• Hire, supervise and train or oversee training of employees in the use of new equipment or production techniques.




2232 Mechanical engineering technologists and technicians

Mechanical engineering technologists and technicians provide technical support and services or may work independently in mechanical engineering fields such as the design, development, maintenance and testing of machines, components, tools, heating and ventilating systems, power generation and power conversion plants, manufacturing plants and equipment. They are employed by consulting engineering, manufacturing and processing companies, institutions and government departments.

• aeronautical technologist
• aerospace engineering technician
• aerospace engineering technologist
• automation technologist
• cryonics engineering technologist
• designer, heating
• designer, machines
• designer, mechanical engineering equipment
• designer, mould
• designer, tool and die
• die designer
• engineering assistant, mechanical equipment
• equipment development technician
• heating designer
• heating, ventilation and air conditioning (HVAC) technologist
• home automation technician
• house automation technician
• HVAC (heating, ventilation and air conditioning) systems specialist
• HVAC (heating, ventilation and air conditioning) technologist
• machine designer
• machine tool designer
• marine engineering technician, mechanical
• marine engineering technologist
• mechanical engineering design technologist
• mechanical engineering development technologist
• mechanical engineering equipment designer
• mechanical engineering technician
• mechanical engineering technologist
• mechanical equipment engineering assistant
• mechanical marine engineering technician
• mechanical technologist
• mould designer
• nuclear engineering technician
• nuclear engineering technologist
• nuclear technologist
• power equipment design technician
• robotics servicing technician
• robotics systems installer and repairer
• robotics technician
• robotics technologist
• ship repair technician
• specialist, HVAC (heating, ventilation and air conditioning) systems
• technical inspector, mechanical
• technician, aerospace engineering
• technician, mechanical engineering
• technician, ship repair
• technologist, aerospace engineering
• technologist, HVAC (heating, ventilation and air conditioning)
• technologist, marine engineering
• technologist, mechanical engineering
• technologist, nuclear engineering
• thermal station technician
• tool and die designer
• tool designer
• vibration technologist
• wind tunnel test technician
• wind tunnel test technologist


Main duties

Mechanical engineering technologists perform some or all of the following duties:
• Prepare and interpret conventional and computer-assisted design (CAD) engineering designs, drawings, and specifications for machines and components, power transmission systems, process piping, heating, ventilating and air-conditioning systems
• Prepare cost and material estimates, project schedules and reports
• Conduct tests and analyses of machines, components and materials to determine their performance, strength, response to stress and other characteristics
• Design moulds, tools, dies, jigs and fixtures for use in manufacturing processes
• Inspect mechanical installations and construction
• Prepare contract and tender documents
• Supervise, monitor and inspect mechanical installations and construction projects
• Prepare standards and schedules and supervise mechanical maintenance programs or operations of mechanical plants.

Mechanical engineering technicians perform some or all of the following duties:
• Assist in preparing conventional and computer-assisted design (CAD) engineering designs, drawings and specifications
• Carry out a limited range of mechanical tests and analyses of machines, components and materials
• Assist in the design of moulds, tools, dies, jigs and fixtures for use in manufacturing processes
• Assist in inspection of mechanical installations and construction projects
• Participate in the installation, repair and maintenance of machinery and equipment.




0211 Engineering managers WE CAN APPLY UNDER 0211 BUT NOT UNDER NOC 2132


Engineering managers plan, organize, direct, control and evaluate the activities of an engineering department, service or firm. They are employed by a wide range of private sector and government establishments and by consulting engineering and scientific research companies.

• aerospace engineering service head
• civil engineering division manager
• director engineering service, quality assurance
• director engineering service, safety service
• director, engineering research and development
• director, engineering service quality control department
• electrical engineering service manager
• engineering delivery chief
• engineering department manager
• engineering manager
• engineering research and development director
• engineering service group manager
• engineering service manager
• engineering service project manager
• engineering service quality assurance director
• engineering service quality assurance manager
• engineering service quality control department director
• engineering service quality control manager
• engineering service quality system manager
• engineering service safety service director
• engineering service superintendent
• industrial engineering department manager
• manager engineering service, quality assurance
• manager, civil engineering division
• manager, electrical engineering service
• manager, engineering
• manager, engineering department
• manager, engineering service
• manager, engineering service group
• manager, engineering service quality control
• manager, industrial engineering department
• manager, mechanical engineering service
• manager, production engineering
• manager, telecommunications engineering service
• manager, traffic engineering service – telecommunications
• mechanical engineering service manager
• production engineering manager
• superintendent, engineering service
• telecommunications engineering service manager
• traffic engineering service manager – telecommunications


Main duties

Engineering managers perform some or all of the following duties:
• Plan, organize, direct, control and evaluate the activities and operations of an engineering department, service or firm
• Develop and implement policies, standards and procedures for the engineering and technical work performed in the department, service, laboratory or firm
• Consult and negotiate with clients to prepare specifications, explain proposals and present engineering reports and findings
• Assign, co-ordinate and review the technical work of the department or project teams
• Recruit personnel and oversee development and maintenance of staff competence in required areas
• May participate directly in the design, development and inspection of technical projects or in the engineering work of the department.



2261 Non-Destructive Testers and Inspectors

Non-destructive testers and inspectors operate radiographic, ultrasonic, liquid penetrant, magnetic particle, eddy current and similar testing equipment to detect discontinuities in objects of various compositions and materials. They are employed by quality control, maintenance and safety departments of manufacturing, processing, transportation, energy and other companies and by private industrial inspection establishments.

Titles

acoustic emission technician
acoustic emission tester
aircraft non-destructive inspection technician
black light inspector
boiler tester
dye penetrant technician
dye penetrant tester
eddy current technician
eddy current tester
fluorescent penetrant inspector
fluoroscope tester
forging inspector
hydrostatic tester
industrial radiographer
industrial radiographer – radiotelephony
infrared technician
infrared tester
infrared thermographer
infrared thermography technician
inspector, black light
inspector, fluorescent penetrant
inspector, non-destructive examination
inspector, non-destructive testing
inspector, ultraviolet light
liquid penetrant inspector
liquid penetrant technician
Magnaflux inspector
magnetic particle inspector
magnetic particle technician
magnetic particle tester
magnetic particle testing technician
maintenance technician – non-destructive testing (NDT)
NDT (non-destructive testing) maintenance technician
non-destructive examination inspector
non-destructive examination technician
non-destructive examiner
non-destructive inspection technician
non-destructive inspector
non-destructive test technician
non-destructive tester
non-destructive testing inspector
non-destructive testing maintenance (NDT) technician
non-destructive testing trainee
pipe tester – non-destructive testing
pipeline inspector
pressure tank tester
pressure vessel tester
qualified operator, non-destructive testing
radiographer, industrial
radiographic technician – non-destructive testing
radiographic tester
reflectoscope tester
technician, NDT (non-destructive testing) maintenance
technician, non-destructive examinations
technician, non-destructive inspection
tester, boiler
thermographer-tester
trainee, non-destructive test
ultrasonic immersion tester
ultrasonic inspector
ultrasonic technician – non-destructive
ultrasonic tester
ultraviolet light inspector
vibration analysis technician – non-destructive test
visual inspector – welding
weld inspector
zyglo inspector
zyglo tester


Main duties

Non-destructive testers and inspectors perform some or all of the following duties:

Set up and calibrate non-destructive testing equipment
Conduct tests to ensure quality or detect discontinuities (defects) using ultrasonic, radiographic, liquid penetrant, magnetic particle, eddy current and other non-destructive testing methods
Establish techniques for proper examination of objects under inspection, ensuring strict adherence to safety regulations
Interpret radiographs, cathode ray tube (CRT) or digital readouts, conductivity meters and visual indicators
Apply testing criteria in accordance with applicable specifications or standards and evaluate results
Organize and report test results
May perform specialized inspections using acoustic emission, vibration analysis, infrared thermography and laser shearography testing methods
May instruct and supervise trainees.


7216 Contractors and Supervisors, Mechanic Trades

This unit group includes heating, refrigeration, air conditioning, millwrighting and elevator installation trade contractors who own and operate their own businesses. This group also includes supervisors who supervise and co-ordinate the activities of workers classified in unit groups within the following minor groups: Machinery and Transportation Equipment Mechanics (Except Motor Vehicle) (731), Automotive Service Technicians (732) and Other Mechanics (733). They are employed in a wide range of establishments; places of employment are indicated in the unit group descriptions.


air conditioning and refrigeration contractor
air conditioning mechanics foreman/woman
aircraft engine assemblers foreman/woman
aircraft engine assembly foreman/woman
aircraft engine fitters foreman/woman
aircraft engine overhaul foreman/woman
aircraft engine repair foreman/woman
aircraft hydraulics repair shop foreman/woman
aircraft maintenance chief
aircraft maintenance engineer (AME) chief
aircraft maintenance engineers (AME) supervisor
aircraft maintenance mechanics foreman/woman – aircraft mechanical systems
aircraft maintenance service supervisor
aircraft maintenance supervisor – aircraft mechanical systems
aircraft maintenance supervisor, mechanical systems
aircraft mechanical systems maintenance service supervisor
aircraft mechanical systems maintenance supervisor
aircraft mechanical systems mechanics foreman/woman
aircraft mechanics and inspectors foreman/woman
aircraft mechanics and inspectors foreman/woman – mechanical systems
aircraft mechanics and repairers foreman/woman – mechanical systems
aircraft mechanics foreman/woman
aircraft propeller repair foreman/woman
aircraft servicing foreman/woman
aircraft servicing supervisor
AME (aircraft maintenance engineer) chief
appliance repair shop foreman/woman
appliance repair shop supervisor
assembly foreman/woman, industrial machinery
assembly foreman/woman, machinery
assembly mechanics foreman/woman
automobile mechanics foreman/woman
automotive body repair foreman/woman
automotive body repair shop supervisor
automotive body shop foreman/woman
automotive body shop supervisor
automotive engine repair foreman/woman
automotive repair and service shop supervisor
automotive service mechanics foreman/woman
automotive service mechanics supervisor
automotive testing shop supervisor
boat engine repair foreman/woman
body shop foreman/woman
body shop supervisor
bus and truck repair foreman/woman
carhouse supervisor – railway transportation
chief aircraft maintenance engineer (AME)
chief AME (aircraft maintenance engineer)
contractor, air conditioning
contractor, air conditioning and refrigeration
contractor, heating and air conditioning
contractor, heating and air conditioning systems
contractor, heating system installation and repair
contractor, heating systems
contractor, refrigeration
crew chief – aircraft maintenance
electric motor repair foreman/woman
electric motor shop foreman/woman
electrical appliance repair shop supervisor
electrical mechanics foreman/woman
electromechanical foreman/woman
electromechanical technicians foreman/woman
elevator construction foreman/woman
elevator constructors foreman/woman
elevators maintenance service supervisor
engine overhaul foreman/woman
engine repair foreman/woman, boats
farm equipment repair foreman/woman
foreman/woman, air conditioning and refrigeration
foreman/woman, air conditioning and refrigeration mechanics
foreman/woman, air conditioning mechanics
foreman/woman, aircraft engine assemblers
foreman/woman, aircraft engine assembly
foreman/woman, aircraft engine fitters
foreman/woman, aircraft engine repair
foreman/woman, aircraft maintenance mechanics – aircraft mechanical systems
foreman/woman, aircraft mechanical systems mechanics
foreman/woman, aircraft mechanics
foreman/woman, aircraft mechanics and inspectors
foreman/woman, aircraft mechanics and inspectors – mechanical systems
foreman/woman, aircraft mechanics and repairers – mechanical systems
foreman/woman, aircraft servicing
foreman/woman, appliance repair shop
foreman/woman, assembly mechanics
foreman/woman, automobile mechanics
foreman/woman, automotive body repair
foreman/woman, automotive body repair shop
foreman/woman, automotive body shop
foreman/woman, automotive engine repair
foreman/woman, automotive service mechanics
foreman/woman, boat engine repair
foreman/woman, body shop
foreman/woman, bus and truck repair
foreman/woman, electrical mechanics
foreman/woman, electromechanical technicians
foreman/woman, elevator construction
foreman/woman, elevator constructors
foreman/woman, elevator mechanics
foreman/woman, engine overhaul
foreman/woman, farm equipment repair
foreman/woman, furnace installers
foreman/woman, ground crew – aircraft maintenance
foreman/woman, heating systems mechanics
foreman/woman, heavy agricultural machinery assembly
foreman/woman, heavy construction equipment assembly
foreman/woman, heavy equipment assembly
foreman/woman, heavy equipment mechanics
foreman/woman, heavy farm equipment assembly
foreman/woman, heavy machinery assembly
foreman/woman, heavy-duty equipment mechanics
foreman/woman, helicopter maintenance – mechanical systems
foreman/woman, household electrical appliance repair shop
foreman/woman, HVAC (heating, ventilating and air conditioning) mechanics
foreman/woman, hydraulic unit repair shop
foreman/woman, industrial machinery assembly
foreman/woman, industrial machinery manufacturing
foreman/woman, industrial machinery mechanics
foreman/woman, industrial mechanics
foreman/woman, industrial, farm and construction machinery mechanics and repairers
foreman/woman, locomotive erecting shop
foreman/woman, locomotive inspectors
foreman/woman, machine builders
foreman/woman, machine fitters
foreman/woman, machine maintenance – manufacturing
foreman/woman, machinery assembly
foreman/woman, machinery manufacturing
foreman/woman, manufacturing machinery assembly
foreman/woman, marine service – engine repair
foreman/woman, mechanical equipment repair inspection
foreman/woman, mechanical equipment repair inspectors
foreman/woman, mechanical inspectors
foreman/woman, mechanical maintenance – utilities
foreman/woman, mechanics
foreman/woman, metal and woodworking machinery manufacturing
foreman/woman, meter repair shop
foreman/woman, millwrights
foreman/woman, motor vehicle body repairers
foreman/woman, motor vehicle engine repair
foreman/woman, motor vehicle mechanics
foreman/woman, motor vehicle mechanics and repairers
foreman/woman, motor vehicle repair shop
foreman/woman, motorcycle mechanics
foreman/woman, office machine repairers
foreman/woman, oil burner installation
foreman/woman, oil burner mechanics
foreman/woman, printer repairers
foreman/woman, printing machine mechanics
foreman/woman, printing machine repair
foreman/woman, printing machine repairers
foreman/woman, printing press and machine mechanics
foreman/woman, processing and packaging equipment maintenance
foreman/woman, production machinery maintenance
foreman/woman, propeller repair
foreman/woman, rail transport equipment repair
foreman/woman, rail transport equipment repairers
foreman/woman, railway car inspection
foreman/woman, railway car inspectors
foreman/woman, railway car maintenance
foreman/woman, railway car repair
foreman/woman, railway car repairers
foreman/woman, railway equipment maintenance inspectors
foreman/woman, railway rolling stock assembly
foreman/woman, railway rolling stock manufacturing
foreman/woman, refrigeration
foreman/woman, refrigeration mechanics
foreman/woman, small engine repair
foreman/woman, small-engine repair shop
foreman/woman, textile machine mechanics
foreman/woman, textile machinery assembly
foreman/woman, transformer repair shop
foreman/woman, turbine assembly
foreman/woman, wheel shop – railway equipment
furnace installers foreman/woman
garage supervisor
ground crew foreman/woman – aircraft maintenance
heating and air conditioning contractor
heating and air conditioning systems contractor
heating system installation and repair contractor
heating systems contractor
heating systems mechanics foreman/woman
heating, ventilating and air conditioning (HVAC) mechanics foreman/woman
heavy agricultural machinery assembly foreman/woman
heavy construction equipment assembly foreman/woman
heavy equipment assembly foreman/woman
heavy equipment mechanics supervisor
heavy farm equipment assembly foreman/woman
heavy machinery assembly foreman/woman
helicopter maintenance foreman/woman – mechanical systems
household electrical appliance repair shop foreman/woman
HVAC (heating, ventilating and air conditioning) mechanics foreman/woman
hydraulic unit repair shop foreman/woman
industrial machinery assembly foreman/woman
industrial machinery manufacturing foreman/woman
industrial machinery mechanics foreman/woman
industrial mechanics foreman/woman
industrial mechanics supervisor
industrial, farm and construction machinery mechanics and repairers foreman/woman
locomotive erecting shop foreman/woman
locomotive inspectors foreman/woman
machine builders foreman/woman
machine fitters foreman/woman
machine fitters supervisor
machine maintenance foreman/woman – manufacturing
machinery assembly foreman/woman
machinery manufacturing foreman/woman
maintenance chief, aircraft
maintenance foreman/woman, production machinery
maintenance mechanic supervisor, production equipment
maintenance mechanic supervisor, production machinery
maintenance mechanics foreman/woman, production machinery
maintenance supervisor, aircraft – aircraft mechanical systems
maintenance supervisor, aircraft mechanical systems
maintenance supervisor, processing and packaging equipment
manufacturing machinery assembly foreman/woman
marine service foreman/woman – engine repair
mechanical equipment repair inspection foreman/woman
mechanical equipment repair inspectors foreman/woman
mechanical inspectors foreman/woman
mechanical maintenance foreman/woman – utilities
mechanical maintenance supervisor
mechanical maintenance supervisor – manufacturing
mechanics foreman/woman
metal and woodworking machinery manufacturing foreman/woman
meter shop foreman/woman
millwright foreman/woman
motor vehicle body repairers foreman/woman
motor vehicle engine repair foreman/woman
motor vehicle mechanics and repairers foreman/woman
motor vehicle mechanics foreman/woman
motor vehicle mechanics supervisor
motor vehicle repair shop supervisor
motorcycle mechanics foreman/woman
office machine repairers foreman/woman
oil burner installation foreman/woman
oil burner mechanics foreman/woman
printer repairers foreman/woman
printing machine mechanics foreman/woman
printing machine repair foreman/woman
printing machine repairers foreman/woman
printing press and machine mechanics foreman/woman
processing and packaging equipment maintenance foreman/woman
processing and packaging equipment maintenance supervisor
production equipment maintenance mechanic supervisor
production machinery maintenance foreman/woman
production machinery maintenance mechanic supervisor
production machinery maintenance mechanics foreman/woman
propeller repair foreman/woman
rail transport equipment repair foreman/woman
rail transport equipment repairers foreman/woman
railway car inspection foreman/woman
railway car inspectors foreman/woman
railway car maintenance foreman/woman
railway car maintenance supervisor
railway car repair foreman/woman
railway car repairer foreman/woman
railway equipment department supervisor
railway equipment maintenance inspectors foreman/woman
railway rolling stock assembly foreman/woman
railway rolling stock manufacturing foreman/woman
refrigeration contractor
refrigeration foreman/woman
refrigeration mechanics foreman/woman
repair foreman/woman, propellers
repair shop foreman/woman, hydraulic units
roundhouse foreman/woman – railway
shop foreman/woman, aircraft hydraulics repair
shop foreman/woman, appliance repair
shop foreman/woman, automotive body repair
shop foreman/woman, household electrical appliance repair
shop foreman/woman, hydraulic unit repair
shop foreman/woman, meter repair
shop foreman/woman, motor vehicle repair
shop foreman/woman, small engine repair
shop foreman/woman, transformer repair
shop foreman/woman, wheels – railway equipment
shop supervisor, automotive body repair
shop supervisor, automotive repair and service
shop supervisor, automotive testing
shop supervisor, electrical appliance repair
shop supervisor, motor vehicle repair
shop supervisor, small engine repair
shop supervisor, small equipment repair
small engine repair foreman/woman
small-engine repair shop foreman/woman
small-engine repair shop supervisor
small-equipment repair shop supervisor
small-machines repair shop supervisor
supervisor, aircraft maintenance – aircraft mechanical systems
supervisor, aircraft maintenance engineers (AME)
supervisor, aircraft maintenance mechanical systems
supervisor, aircraft maintenance service
supervisor, aircraft mechanical systems maintenance service
supervisor, aircraft servicing
supervisor, appliance repair shop
supervisor, automotive body repair shop
supervisor, automotive body shop
supervisor, automotive repair and service shop
supervisor, automotive service mechanics
supervisor, automotive testing shop
supervisor, body shop
supervisor, electrical appliance repair shop
supervisor, elevator maintenance service
supervisor, garage – motor vehicles
supervisor, heavy equipment mechanics
supervisor, industrial mechanics
supervisor, machine fitters
supervisor, mechanical maintenance
supervisor, mechanical maintenance – manufacturing
supervisor, motor vehicle mechanics
supervisor, motor vehicle repair shop
supervisor, processing and packaging equipment maintenance
supervisor, production equipment maintenance mechanic
supervisor, production machinery maintenance mechanic
supervisor, railway car maintenance
supervisor, railway car repairers
supervisor, railway equipment department
supervisor, small-engine repair shop
supervisor, small-equipment repair shop
supervisor, small-machines repair shop
supervisor, textile mechanics
textile machine mechanics foreman/woman
textile machine mechanics supervisor
textile machinery assembly foreman/woman
transformer repair shop foreman/woman
turbine assembly foreman/woman
wheel shop foreman/woman – railway equipment

Main duties

Contractors and supervisors in this unit group perform some or all of the following duties:

Supervise, co-ordinate and schedule the activities of workers who repair and maintain aircraft, railway locomotives and cars, industrial machinery and equipment, construction and other heavy equipment, textile equipment, printing machines, heating equipment and furnaces, transformers and other electrical equipment, motor vehicles, air-conditioning and refrigeration equipment, electric appliances and other equipment, such as motorcycles, outboard motors and snowmobiles
Establish methods to meet work schedules and co-ordinate work activities with other departments
Requisition materials and supplies
Resolve work problems and recommend work measures to improve productivity
Train or arrange for training of workers
Recommend personnel actions such as hiring and promotions
Ensure that standards for safe working conditions are observed
Prepare production and other reports
May manage the operations of own company
May also supervise, co-ordinate and schedule the activities of related apprentices, helpers and labourers.



7211 Supervisors, Machinists and Related Occupations

Supervisors in this unit group supervise and co-ordinate the activities of workers classified in the following unit groups: Machinists and Machining and Tooling Inspectors (7231), Tool and Die Makers (7232) and Machining Tool Operators (9511). They are employed by metal products manufacturing companies and machine shops.

Titles

automotive machine shop foreman/woman
foreman/woman, automotive machine shop
foreman/woman, machine shop
foreman/woman, machine shop inspectors
foreman/woman, machine tool operators
foreman/woman, machining
foreman/woman, machining and tooling inspectors
foreman/woman, machining inspectors
foreman/woman, machining tool operators
foreman/woman, machining tools
foreman/woman, machinists
foreman/woman, machinists and machine tool set-up operators
foreman/woman, maintenance machine shop
foreman/woman, metal mould and metal patternmakers
foreman/woman, metal-machining inspection
foreman/woman, mould shop – machining
foreman/woman, tool and die inspectors
foreman/woman, tool and die makers
foreman/woman, tooling inspectors
machine shop foreman/woman
machine shop inspectors foreman/woman
machine shop supervisor
machine tool grinding foreman/woman
machine tool operators foreman/woman
machining and tooling inspectors foreman/woman
machining foreman/woman
machining inspectors foreman/woman
machining supervisor
machining tool foreman/woman
machining tool operators foreman/woman
machinists and machine tool set-up operators foreman/woman
machinists foreman/woman
machinists supervisor
maintenance machine shop foreman/woman
metal mould and metal patternmakers foreman/woman
metal mould and metal patternmakers supervisor
metal-machining inspection foreman/woman
mould shop foreman/woman – machining
pattern shop foreman/woman – metal machining
precision instrument machine shop foreman/woman
production machine shop foreman/woman
quality control foreman/woman – metal machining
shipyard machine shop foreman/woman
supervisor, machine shop
supervisor, machining
supervisor, machinists
supervisor, metal mould and metal patternmakers
supervisor, tool and die inspectors
supervisor, tool and die makers
supervisor, tooling inspectors
tool and die inspectors foreman/woman
tool and die inspectors supervisor
tool and die makers foreman/woman
tool and die makers supervisor
tool and die making supervisor
tooling foreman/woman
tooling inspectors foreman/woman
tooling inspectors supervisor
tooling supervisor
toolroom foreman/woman


Main duties


Supervisors in this unit group perform some or all of the following duties:
• Supervise, co-ordinate and schedule the activities of workers who machine metal into parts, products, tools and dies or moulds with precise dimensions
• Establish methods to meet work schedules and co-ordinate work activities with other departments
• Requisition materials and supplies
• Resolve work problems and recommend work measures to improve productivity
• Train or arrange for training of workers
• Recommend personnel actions such as hiring and promotions
• Ensure standards for safe working conditions are observed
• Prepare production and other reports
• May set up machines and equipment and write programs for computer numerically controlled (CNC) machine tools
• May also supervise, co-ordinate and schedule the activities of related apprentices, helpers and labourers.


7262 Boilermakers

Boilermakers fabricate, assemble, erect, test, maintain and repair boilers, vessels, tanks, towers, heat exchangers and other heavy-metal structures. They are employed in boiler fabrication, manufacturing, shipbuilding, construction, electric power generation and similar industrial establishments.

Titles


boiler fitter
boiler installer
boiler repairer
boiler repairman/woman
boiler shop mechanic
boilermaker
boilermaker apprentice
boilermaker, erection and repair
boilermaker, maintenance
boilermaker-welder
construction boilermaker
industrial boilermaker
industrial construction boilermaker
industrial heat exchanger boilermaker
journeyman/woman boilermaker
maintenance boilermaker
marine boilermaker
pressure vessel boilermaker
pressure vessel fabricator


Main duties

Boilermakers perform some or all of the following duties:
• Read blueprints or specifications to plan sequence of operation
• Lay out plate, sheet steel or other heavy metal and mark bending and cutting lines on work piece using protractors, compasses and drawing instruments or templates
• Set up and operate heavy-metal working machines such as brakes, rolls, shears, flame cutters and drill presses to cut, shape and form metal into parts or sections
• Fit and weld metal parts or sections together to fabricate boilers, vessels, tanks, heat exchangers, piping and other heavy-metal products
• Erect and install boilers and other heavy-metal products according to specifications using hand and power tools
• Repair and perform maintenance work on boilers and other heavy-metal products
• Direct activities of hoist or crane operators and other workers during fabrication, assembly, installation or repair of structures
• Test finished structures using a variety of methods.
Boilermakers may specialize in rigging and hoisting, preparation and layout, or welding aspects of the trade.




9213 Supervisors, Food, Beverage and Tobacco Processing

Supervisors in this unit group supervise and co-ordinate the activities of workers who operate processing machines, and package or grade food, beverage and tobacco products. They are employed in fruit and vegetable processing plants, dairies, flour mills, bakeries, sugar refineries, fish plants, meat plants, breweries and other food, beverage and tobacco processing establishments.

supervisor – meat packing
supervisor – vegetable packing
supervisor, abattoir
supervisor, bakery plant
supervisor, bottling
supervisor, brewery
supervisor, fish freezing
supervisor, fish processing
supervisor, food and beverage processing
supervisor, food product graders
supervisor, food product testers
supervisor, food testing
supervisor, meat packing
supervisor, packaging – food and beverage processing
supervisor, poultry graders
supervisor, production – food and beverage processing
supervisor, slaughterhouse
supervisor, tobacco processing
supervisor, tobacco-processing machine operators
supervisor, vegetable canning
supervisor, vegetable packing


Main duties

Supervisors in this unit group perform some or all of the following duties:
• Supervise, co-ordinate and schedule the activities of workers who process, package, test and grade food, beverage and tobacco products
• Establish methods to meet work schedules and co-ordinate work activities with other units
• Resolve work problems and recommend measures to improve productivity and product quality
• Requisition materials and supplies
• Train staff in job duties, safety procedures and company policy
• Recommend personnel actions such as hirings and promotions
• Prepare production and other reports.


9214 Supervisors, Plastic and Rubber Products Manufacturing

Supervisors in this unit group supervise and co-ordinate the activities of workers who operate processing machines and who fabricate, assemble and inspect rubber or plastic products. They are employed by rubber and plastic products manufacturing companies and in plastic parts divisions of other manufacturing companies.


Titles

supervisor, assemblers – rubber and plastic products manufacturing
supervisor, curing – rubber products manufacturing
supervisor, extruding – rubber and plastic products manufacturing
supervisor, extrusion – rubber and plastic products manufacturing
supervisor, finishing – plastic products manufacturing
supervisor, finishing – rubber products manufacturing
supervisor, finishing and trimming – rubber and plastic products manufacturing
supervisor, footwear inspection – rubber products manufacturing
supervisor, hose building – rubber products manufacturing
supervisor, injection moulding – plastic products manufacturing
supervisor, inner tube building
supervisor, matting inspection – rubber products manufacturing
supervisor, millroom – rubber products manufacturing
supervisor, mixing – rubber and plastic products manufacturing
supervisor, moulding – rubber and plastic products manufacturing
supervisor, paint department – plastic products manufacturing
supervisor, paint department – rubber products manufacturing
supervisor, plastic products inspection
supervisor, plastic products inspectors
supervisor, plastic products manufacturing
supervisor, plastics-processing shop
supervisor, quality control – rubber and plastic products manufacturing
supervisor, retread tire inspection – rubber products manufacturing
supervisor, roll building – rubber products manufacturing
supervisor, rubber footwear moulding
supervisor, rubber goods dipping
supervisor, rubber hose building
supervisor, rubber products inspection
supervisor, rubber products inspectors
supervisor, rubber products manufacturing
supervisor, sampling – rubber and plastic products manufacturing
supervisor, spray chamber – rubber and plastic products manufacturing
supervisor, thermoforming – plastics products manufacturing
supervisor, tire building
supervisor, tire finishing
supervisor, tire inspection
supervisor, tire retreading
supervisor, tire stock preparation
supervisor, tire tube building
supervisor, V-belt building – rubber products manufacturing
supervisor, vulcanization – rubber products manufacturing
thermoforming foreman/woman – plastic manufacturing
thermoforming supervisor – plastic products manufacturing
tire building foreman/woman
tire building supervisor
tire finishing foreman/woman
tire finishing supervisor
tire inspection supervisor
tire retread foreman/woman
tire retreading supervisor
tire stock preparation foreman/woman
V-belt foreman/woman – rubber manufacturing
vulcanization supervisor – rubber products manufacturing


Main duties

Supervisors in this unit group perform some or all of the following duties:
• Supervise, co-ordinate and schedule the activities of production workers who operate processing machines and who fabricate, assemble, finish or inspect plastic or rubber parts and products
• Establish methods to meet work schedules and co-ordinate work activities with other departments
• Resolve work problems and recommend measures to improve productivity and product quality
• Requisition materials and supplies
• Train staff in job duties, safety procedures and company policies
• Recommend personnel actions such as hirings and promotions
• Prepare production and other reports
• May set up machines and equipment.



9221 Supervisors, Motor Vehicle Assembling

Supervisors in this unit group supervise and co-ordinate the activities of workers in motor vehicle production departments. They are employed in plants which manufacture automobiles, vans and light trucks.

motor vehicle assembly general supervisor
motor vehicle assembly supervisor
motor vehicle assembly zone supervisor
motor vehicle inspection and testing foreman/woman – motor vehicle manufacturing
motor vehicle manufacturing foreman/woman
paint department foreman/woman – motor vehicle manufacturing
paint shop foreman/woman – motor vehicle manufacturing
paint shop supervisor – motor vehicle manufacturing
production line foreman/woman – motor vehicle manufacturing
supervisor, assembly – motor vehicle manufacturing
supervisor, body shop – motor vehicle manufacturing
supervisor, chassis assembly – motor vehicle manufacturing
supervisor, engine dress – motor vehicle manufacturing
supervisor, final assembly – motor vehicle manufacturing
supervisor, motor vehicle assembly
supervisor, paint shop – motor vehicle manufacturing
supervisor, trim and hardware – motor vehicle manufacturing
trim and hardware supervisor – motor vehicle manufacturing
zone supervisor, assembly – motor vehicle manufacturing
zone supervisor, motor vehicle assembly


Main duties

Supervisors in this unit group perform some or all of the following duties:
• Supervise, co-ordinate and schedule the activities of workers in motor vehicle manufacturing production departments such as body shop, chassis, paint, trim and hardware and final assembly
• Establish methods to meet work schedules and co-ordinate work activities with other units
• Resolve work problems and recommend measures to improve productivity and product quality
• Train staff in job duties, safety procedures and company policies
• Requisition materials and supplies
• Recommend personnel actions such as hirings and promotions
• Prepare production and other reports.





9511 Machining Tool Operators

Machining tool operators set up and operate or tend metal-cutting machines designed for repetitive machining work. They are employed by metal products and other manufacturing companies and in machine shops. This unit group also includes workers who etch or chemically mill metal pieces.

aircraft engine parts machine tool set-up operator
aircraft parts etcher
automated machine tool set-up operator
automatic screw machine operator
automatic transfer machine operator – metal machining
axle lathe operator
barrel rifler
barrel threader, small arms
bearing borer
bearing grinder
bench set-up operator, machine tool
bolt threader
bolt-threading machine operator
borer – metal machining
boring machine operator – metal machining
boring mill operator – metal machining
boring mill set-up operator – metal machining
brake drum lathe operator
broacher, production – metal machining
broaching machine operator – metal machining
broaching machine set-up operator – metal machining
Bullard multiple-spindle lathe operator
camming machine operator – metal machining
centreless cylindrical grinder set-up operator
centreless cylindrical-grinder operator
centreless grinder operator
centreless grinder set-up operator
chucking machine set-up operator

 

[sabrinawaiz]

Hmm.... MR GRAVITY, Your post got me thinking.....

I have submitted ECA credentials of my Masters Degree in Production Engineering to claim points.
My work experience is of the Designation - Design Engineer Mechanical.

Wonder if CIC will conclude that my education is befitting NOC 2141 and return my application (Overlooking my experience and citing my Masters degree in Production Engineering)

Here in Germany, Masters programme in Production Engineering is a specialization in one field of Mechanical Engineering.

I hope not to get such an assessment by CIC on my qualification and experience.

Cheers!

 

[MR GRAVITY]

Hmm.... MR GRAVITY, Your post got me thinking.....

I have submitted ECA credentials of my Masters Degree in Production Engineering to claim points.
My work experience is of the Designation - Design Engineer Mechanical.

Wonder if CIC will conclude that my education is befitting NOC 2141 and return my application (Overlooking my experience and citing my Masters degree in Production Engineering)

Here in Germany, Masters programme in Production Engineering is a specialization in one field of Mechanical Engineering.

I hope not to get such an assessment by CIC on my qualification and experience.

Cheers!

Definitely not at all a problem for you sabrinawaiz. Having Masters in Production after Bachelors in Mechanical is a common thing. Mechanical Design Engineer mentioned in NOC 2132. I am concerned about applicants whose roles/responsibilities/Job duties does not match with NOC 2132 and fit in other NOC's mentioned above might be facing tough time with CIC during their application processing.

 

[sabrinawaiz]

MR GRAVITY, Very recently Germany changed its education system to Bachelors and Masters by abolishing the Diplom.

Earlier it was Diplom after completing which one will be called Dipl.Ing.XXXX and this degree makes one eligible to pursue doctoral education.

http://en.wikipedia.org/wiki/Diplom
The Diplom was usually awarded in the natural sciences, business and in engineering, while students of humanities, arts and languages finished with a Magister. (The degree in social sciences differed from university to university.) All kind of Diplom degrees were usually first degrees. However, the Diplom / Diplom (Univ.) was also the highest non-doctoral degree in science, business or engineering in Germany.

What I have is a Diplom from a German University which is currently equivalent to Masters in Engineering. I have my ECA credential from WES which states my degree equivalent to a Canadian Masters degree.

 

[MR GRAVITY]

MR GRAVITY, Very recently Germany changed its education system to Bachelors and Masters by abolishing the Diplom.

Earlier it was Diplom after completing which one will be called Dipl.Ing.XXXX and this degree makes one eligible to pursue doctoral education.

http://en.wikipedia.org/wiki/Diplom
The Diplom was usually awarded in the natural sciences, business and in engineering, while students of humanities, arts and languages finished with a Magister. (The degree in social sciences differed from university to university.) All kind of Diplom degrees were usually first degrees. However, the Diplom / Diplom (Univ.) was also the highest non-doctoral degree in science, business or engineering in Germany.

What I have is a Diplom from a German University which is currently equivalent to Masters in Engineering. I have my ECA credential from WES which states my degree equivalent to a Canadian Masters degree.

sabrinawaiz you dont need to worry at all. your profile is damn perfect

 

[sabrinawaiz]

sabrinawaiz you dont need to worry at all. your profile is damn perfect

Not worried.... I grabbed that opportunity to talk about a recent change in German Education System.
From now on, We too will hear Bachelors and Masters.

 

[MR GRAVITY]

Not worried.... I grabbed that opportunity to talk about a recent change in German Education System.
From now on, We too will hear Bachelors and Masters.

Hope so Actually some people are misguided by the consultants pretending that the applicants fall under NOC 2132. I wish them to go through all these NOC's and evaluate their profiles before applying whether they fall under NOC 2132 MECHANICAL ENGINEERS