ENGINEERS with "Foreign Quals" -How to Succeed !!!

[coolguy001]

nice post...Thanks

 

[ammaartahir]

very informative post; thanks

 

[rosellyalung]

thanks for the thread that will help my husband here to work as an engineer,

Regarding the Physiotherapist, we have to our credentials be assessed by the ALLIANCE, check in the website http://alliancept.org/ for the accreditation for it, thanks and god bless!

 

[Donx]

Good job Boss!!

 

[Teaspoon]

ELECTRICAL ENGINEERING professional EXAMINATIONS for the province of Ontario:

following is the syllabus for the professional exam syllabus:
so be prepare yourself before going to canada. i have collected some books of some subjects. if some one has some other book please do not bother to share.

Meanwhile please invite some expert , who has already face this exam , so he can guide us and also share his experience.

There are some institutions in canada , they help to prepare and distribute the material for the exams. if some of the senior members who has already gone through such institution , please share your material , so that we can take study preparation. which will be difficult later while in canada.


INTRODUCTION
Examinations from discipline syllabi other than those specific to the candidates’ discipline may be assigned at the discretion of the constituent member.
Before writing the discipline examinations, candidates must have passed, or been exempted from, the Basic Studies Examinations.
The constituent members will supply information on examination scheduling, textbooks, materials provided or required, and whether the examinations are open or closed book.

ELECTRICAL ENGINEERING EXAMINATIONS

GROUP A

COMPULSORY EXAMINATIONS (SEVEN REQUIRED)

07-Elec-A1 Circuits
Electric circuit components: lumped parameter models. Nodal and mesh analysis of linear, passive circuits; equivalent networks. Steady state analysis of lumped parameter, time-invariant circuits: differential equation formulation, sinusoidal inputs, frequency response, impulse response, and transfer functions. Laplace transform analysis and circuit transient response. Two-port circuit models and analysis.

07-Elec-A2 Systems and Control

System models, impulse response functions, and transfer functions. System input-output and convolution. Root locus analysis and design. Feedback and stability: Bode diagrams. Nyquist criterion, frequency domain design. State variable representation. Simple PID control systems.

07-Elec-A3 Signals and Communications

Analysis of continuous-time signals: Fourier series and Fourier transform; magnitude, phase, and power spectra. Analysis of discrete-time signals: Nyquist sampling theorem; the Z-transform. Analog communication systems: amplitude and frequency modulation and demodulation. Digital communication systems: pulse code modulation; bandpass modulation and demodulation techniques.

Final Page 1 of 4

Electrical Engineering Syllabus - 2007
07-Elec-A4 Digital Systems and Computers
Combinational, sequential, and synchronous logic circuits. Register level design of digital systems. Computer arithmetic, central processing unit, memory systems and peripherals. Assembly language programming, interrupts, and interfacing and communication. Computer architecture..

07-Elec-A5 Electronics

Semiconductor devices; diodes and thyristors. Bipolar and field effect transistors as linear devices and switches. Bias circuits, basic amplifiers, small-signal equivalent circuits, transfer functions, and frequency response. Operational amplifiers and comparators. Digital integrated circuits and logic families: TTL, TTL-LS, and CMOS.

07-Elec-A6 Power Systems and Machines

Magnetic circuits and transformers. Wye and delta connected three-phase systems. Generation, transmission, and distribution of electric power. Three-phase transformers. AC and DC machines. Three-phase synchronous machines and three phase induction motors.

07-Elec-A7 Electromagnetics

Field concepts. Maxwell's equations, integral and differential forms. Free space and guided wave propagation, transmission lines. Radiation from current elements.
Final Page 2 of 4
Electrical Engineering Syllabus - 2007

GROUP B

ELECTIVE EXAMINATIONS (TWO REQUIRED)

07-Elec-B1 Digital Signal Processing

Discrete-time signals and systems: system input-output and convolution, Z-transform and transfer functions. Discrete-time Fourier transform (DFT) and Fast Fourier transform (FFT). Design of finite impulse response (FIR) and infinite impulse response (IIR) filters. DSP implementation considerations.

07-Elec-B2 Advanced Control Systems
Modelling of engineering systems; state variables and transfer function representations. Analytical and numerical solutions of state variable equations. Observability, controllability, stability; classical design, stabilization by pole assignment. Systems with delay. Systems with noise. Computer control, discrete systems. System identification; least squares.

07-Elec-B3 Digital Communications Systems

A/D conversion, source coding; signal sets, line codes, modulation, optimal reception, demodulation, performance in noisy channels, error detecting and correcting codes. Radio communications; link analysis and performance, terrestrial and satellite communications.
07-Elec-B4 Information Technology Networks
Layered architecture, circuit-switching networks, peer-to-peer protocols and data link layer, medium access control protocols, local area networks, packet-switching networks, TCP/IP, ATM networks, cellular networks, paging and wireless networks, telephone networks.

07-Elec-B5 Advanced Electronics

Device models: circuit behaviour, high frequency, and feedback. Multi-stage amplifiers, oscillators, current mode op-amps, non-linear circuits. Power amplifiers and linear regulators. Instrumentation: differential amps, optical isolators, and analog-digital and digital-analog converters.

07-Elec-B6 Integrated Circuit Engineering

Integrated Circuit Design: MOS circuit design methods; specification; use of CAD design tools. Non-ideal effects. Mask level layout. Integrated Circuit Fabrication: basic knowledge of IC processing techniques. Digital and analog IC's: basic building blocks. Design considerations for submicron CMOS and bipolar devices.

07-Elec-B7 Power Systems Engineering

Power system representation and analysis. Components: power transmission lines, transformers, synchronous machines. Distribution: power flow, operations, and control. Fault analysis and power system protection. System stability.
Final Page 3 of 4

Electrical Engineering Syllabus - 2007

Final Page 4 of 4

07-Elec-B8 Power Electronics and Drives
Principles and modelling of electric machines: dc machines, induction machines, and synchronous machines. Power electronic devices and converters: choppers, inverters, cycloconverters, and switched power supplies. Electric drives: torque and speed control, and field and vector oriented control techniques.

07-Elec-B9 Electromagnetic Field, Transmission Lines, Antennas, and Radiation
Field radiation equations. Distributed circuits: steady-state transmission line equations; impedance transformation, Smith charts, matching. Transients. Coaxial lines, waveguides. Antennas: infinitesimal elements, linear antennas, radiation resistance, antenna patterns, gain.

07-Elec-B10 Electro-Optical Engineering

Optical transmission: waveguide modes, fibre optic propagation characteristics. Optoelectronics: lasers, sources and detectors, couplers, modulators, guided wave devices. Applications.

Please looking forward to have some more info from other members than my effort will be successful , if some one take it more forward

Teaspoon

 

[Teaspoon]

if any member from Bangladesh and Pakistan get their engineering degree and work experience assess for foreign credential assessment by the Ontario province please share your experience. please looking forward for the info

 

[Donx]

good stuff!

 

[The Champion]

Hi Teaspoon and Qorax,

thanks for your very useful information for Engineers wanting to migrate to Canada.

Please I would like to find out if you do have any information on this whatsoever.

What does a Phd degree and a masters degree in Engineering from the U.K normally translate into when assesed by the Canadian Engineering council ? I mean to say, after the assesment, will the Phd or M.Sc still hold as a degree or they might be downgrade into lower degrees ?

Thanks in anticipation

 

[Palscorpion]

Dear Quorax,

thank you for the helpful information .


Cheers . . . . . . .

 

[shaikh sahib]

thanks

 

[rosellyalung]

Hello ! i just want to ask do you know any conpany or work in any company that needs electronics and communications engineer? Pls help iam looking for a job for my husband who is one

 

[rauf]

Dear qorax,

Very informative, as always. You are amazing!!! Once I am there in Canada, I would like to network and be of help to all would be engineering immigrants.

 

[rosellyalung]

Hello ! i just want to ask do you know any conpany or work in any company that needs electronics and communications engineer? Pls help iam looking for a job for my husband who is one

 

[qorax]

Hello ! i just want to ask do you know any conpany or work in any company that needs electronics and communications engineer? Pls help iam looking for a job for my husband who is one

U'll have to 'land' & start looking.
No Canadian employer would be interested in any applicant who s/he can't personally interview.

Qorax

 

[edmonta]

http://www.accc.ca/english/services/i-services/bt_programs.htm

found this info. while searching for bridging-co op programms in other province like Alberta.

Seems that there are enough options available for the bridging programmes in other provinces except Ontario too..

Regards

Edmonta