Digital photo after ITA

[karthik506]

Hello, I have digital photo with 390 x 510 resolution and 300 dpi specification. Can I use it?

According to CIC, the resolution should be 420*540. When I convert 390 x 510 to 420 x 540, the dpi is still same (300). But, CIC asks a digital photo with minimum 600 pixel/inch. I am little bit confused. Please tell me that can I use the one I have with 420 x 540 resolution and 300 dpi?

 

[mukulabd]

Convert it to 600dpi and half its size.

 

[karthik506]

Convert it to 600dpi and half its size.

I am sorry I cannot understand.. What is half its size?

 

[mukulabd]

I am sorry I cannot understand.. What is half its size?

If you double its dpi it will also make the digital image bigger in terms of pixels. So you will have to shrink it back to original resolution.

 

[mmtsd1]

Use the infraview program....

 

[karthik506]

Use the infraview program....

I have it. Please give me some idea to create photo as per CIC requirement.

 

[vishalg]

I have it. Please give me some idea to create photo as per CIC requirement.

Open the image in irfanview---->click the image tab---->click 'Resize/Resample----->change DPI and then save
I did not know about the 600 dpi, thanks from bringing that up,i hope i did it right (i did not reduce the size by half)
Current Properties - 420 x 540, 600 DPI

 

[karthik506]

Open the image in irfanview---->click the image tab---->click 'Resize/Resample----->change DPI and then save
I did not know about the 600 dpi, thanks from bringing that up,i hope i did it right (i did not reduce the size by half)
Current Properties - 420 x 540, 600 DPI

I cannot go DPI beyond 300. My current properties are 420 x 549 and 300 dpi

 

[nikolain]

I believe you can never add DPI to an existing image, you can only reduce it, try scanning a new photo in 600 DPI.

 

[PurpleTuzi]

Hello, I have digital photo with 390 x 510 resolution and 300 dpi specification. Can I use it?

According to CIC, the resolution should be 420*540. When I convert 390 x 510 to 420 x 540, the dpi is still same (300). But, CIC asks a digital photo with minimum 600 pixel/inch. I am little bit confused. Please tell me that can I use the one I have with 420 x 540 resolution and 300 dpi?

It best to go to photo studio and have them take the picture in accordance with IRCC''s requirements.

 

[Castillo]

e author=PurpleTuzi link=topic=475121.msg5784667#msg5784667 date=1487385872]
It best to go to photo studio and have them take the picture in accordance with IRCC''s requirements.
[/quote]


Please wats d requirement as per resolution

 

[Gooner]

e author=PurpleTuzi link=topic=475121.msg5784667#msg5784667 date=1487385872]
It best to go to photo studio and have them take the picture in accordance with IRCC''s requirements.



Please wats d requirement as per resolution

Dimensions:
• The final frame size of the photo must be at least 35 mm x 45 mm (1 3/8" x 1 ¾").
• The photographs must show the full front view of the head, with the face in the middle of the photograph, and include the top of the shoulders.
• The size of the head, from chin to crown, must be between 31 mm (1 ¼") and 36 mm (1 7/16").
• Digital dimensions are often expressed in pixels or DPI (dots per inch). The physical dimensions in pixels must be at least 420 x 540.
Quality/Resolution:
• If an existing photo is being scanned, the minimum resolution must be 600 pixels per inch.
File Format:
• The file may be submitted in JPEG or JPEG2000 format.
File Size:
• The final size of the image should be ideally 240 kB (kilobytes), but not less than 60 kB.
Colour:
• The image must be in color (24 bits per pixel) in sRGB colour space which is the common output for most digital cameras.

 

[Castillo]

Dimensions:
• The final frame size of the photo must be at least 35 mm x 45 mm (1 3/8" x 1 ¾").
• The photographs must show the full front view of the head, with the face in the middle of the photograph, and include the top of the shoulders.
• The size of the head, from chin to crown, must be between 31 mm (1 ¼") and 36 mm (1 7/16").
• Digital dimensions are often expressed in pixels or DPI (dots per inch). The physical dimensions in pixels must be at least 420 x 540.
Quality/Resolution:
• If an existing photo is being scanned, the minimum resolution must be 600 pixels per inch.
File Format:
• The file may be submitted in JPEG or JPEG2000 format.
File Size:
• The final size of the image should be ideally 240 kB (kilobytes), but not less than 60 kB.
Colour:
• The image must be in color (24 bits per pixel) in sRGB colour space which is the common output for most digital cameras.

Thanks goner.

Your source for this information please!

 

[syeduzairhaider]

Hello, I have digital photo with 390 x 510 resolution and 300 dpi specification. Can I use it?

According to CIC, the resolution should be 420*540. When I convert 390 x 510 to 420 x 540, the dpi is still same (300). But, CIC asks a digital photo with minimum 600 pixel/inch. I am little bit confused. Please tell me that can I use the one I have with 420 x 540 resolution and 300 dpi?

the 600 dpi is for pictures which has been scanned...

Digital Photographs has nothing to do with DPI...Default usually is 300 which is good enough.

 

[Gooner]

Thanks goner.

Your source for this information please!

These are the specifications appear when you click the information (i) button next to Digital Photo in the application checklist.