+1(514) 937-9445 or Toll-free (Canada & US) +1 (888) 947-9445
Client Portal

AINP FSW BACKLOG REDUCTION PILOT

Rknbi,

Yes, the PR card is to delivered to the addresses you give during the landing. Process. I provideda friend's address and it is in his custody. Another pal of mine is n Calgary so he can easily bring it to Nigeria for us.

Ofonzo
 
ofonzo said:
Rknbi,

Yes, the PR card is to delivered to the addresses you give during the landing. Process. I provideda friend's address and it is in his custody. Another pal of mine is n Calgary so he can easily bring it to Nigeria for us.

Ofonzo
Click to expand...

Thanks Ofonzo ! Planning to land next year. Still looking for jobs...
REG
RKNBI
 
Hi Ofonzo,USMA

Please advise, Did you carry any photos to be given to the immigration officer for PR cards?

Thanks & Regards
RKNBI
 
No additional photos are required. The photos Canadian immigration will use for the PR card is the one on the confirmation of permanent residence.
 
ofonzo said:
No additional photos are required. The photos Canadian immigration will use for the PR card is the one on the confirmation of permanent residence.
Click to expand...
Thanks Ofonzo
Kind Regards
RKNBI
 
Hello Folks,

Apologies I have been away from the thread trying to scrape a living. I am still in Nigeria working on the transfer. How is everyone? RKNBI, Arsal, USMA, Jaggu any updates?
 
ofonzo said:
Hello Folks,

Apologies I have been away from the thread trying to scrape a living. I am still in Nigeria working on the transfer. How is everyone? RKNBI, Arsal, USMA, Jaggu any updates?
Click to expand...

Hi all, hope things are going well at your end. Sorry for being away from this post as was busy with settle.

By gods graces, it's going good in Calgary and manage to get transfer from previous location. Healthcard, driving license hazzles almost ended...

How things r going at your end.? Update us. Merry Christmas holidays to all.
 
Hi folks, i also apologise for long absense, i m at edmonton, started a survival job and in search of professional job, PR cards received, driving license got and also bought a vehicle, life is going better day by day' also thinking about to get admission in masters of engg. its a little bit difficult to enter in market of engineering job for a new comer but not impossible, one of my friend landed at same days but at Calgary has got engg. job after a struggle of 03 months. i could not give sufficient time due to busy in survival job, also i lost most of the time at bus stops when i had no driving license and vehicle, here life without driving license and vehicle is like hell, edmonton transport system requires a 1.5 hrs time for a 15 minutes your own drive. but it depends on your route. If you have any specific questions please ask i will answer.
Happy New Year to all
 
Happy new year to everyone,

I believe that this year holds great promise for each and everyone of us. Just keep believing.

I am sorry I have been away from the forum for a while. I am still working on a transfer so I am in Nigeria at present but I have also taken the liberty to get my Project Management Professional (PMP) certification (Which i did in December) and I am working on sitting for the fundamentals of engineering exam required by APEGGA for registration. This exam is required because I did my degree outside of Canada, USA and Europe.

USMA, Please share with us in greater detail how your friend got the engineering job and what lessons we can learn from it. I wish you all the best.

All, Please provide update on your status/progress.

Happy New Year again.

ofonzo
 
Hi Guys,

Apologies for not responding you earlier. Unfortunately I have not heard anything from London CHC office and still awaiting for the outcome of my application.
 
Areal, sorry to heard about the delay. I would suggest you contact the about your application. There may be some mistake on their part.
 
Hi friends, hope you all r doing good. If n e of u are in Calgary or Edmonton, we can plan for coffee . N e suggestion. My email id is jignesh1179@gmail.com. I have one more person I our group I.e maulik Bhatt and we already met.

Good luck for guys who are waiting for process.
 
Hello folks,

How are you all doing? I trust good. Sorry for the long silence. As usual a man has got to make a living, I am still in Nigeria. I was back in Calgary this past month to seat for the Fundamentals of Engineerng (FE) with is a prerequisite for Engineering licensing/Registration by APEGA in Alberta. Glad to inform the house that I passed the FE Mechanical Exam.

My academic credentials were reviewed/evaluated by APEGA and I was advised to sit for the FE Exam and the National Professional Practice Exam. A Foreign degree holder is required to do the FE exams if his/her degreee is not from either Canada, USA, Europe or Japan/Korea.

You can access the APEGA website using www.APEGA.ca . To register for the FE exam, you must have pre-qualification done by APEGA who forward your particulars ( Name, degree details) to the exam provider NCEES. You can access NCEES via this link http://ncees.org/supplemental-pages/my-ncees/.

Please let me know if you need any assistance during this process. I would be very glad to help.

Stay Blessed

ofonzo
 
ofonzo said:
Hello folks,

How are you all doing? I trust good. Sorry for the long silence. As usual a man has got to make a living, I am still in Nigeria. I was back in Calgary this past month to seat for the Fundamentals of Engineerng (FE) with is a prerequisite for Engineering licensing/Registration by APEGA in Alberta. Glad to inform the house that I passed the FE Mechanical Exam.

My academic credentials were reviewed/evaluated by APEGA and I was advised to sit for the FE Exam and the National Professional Practice Exam. A Foreign degree holder is required to do the FE exams if his/her degreee is not from either Canada, USA, Europe or Japan/Korea.

You can access the APEGA website using www.APEGA.ca . To register for the FE exam, you must have pre-qualification done by APEGA who forward your particulars ( Name, degree details) to the exam provider NCEES. You can access NCEES via this link http://ncees.org/supplemental-pages/my-ncees/.

Please let me know if you need any assistance during this process. I would be very glad to help.

Stay Blessed

ofonzo
Click to expand...

I catch ooooo. Baba.
 
ofonzo said:
Hello folks,

How are you all doing? I trust good. Sorry for the long silence. As usual a man has got to make a living, I am still in Nigeria. I was back in Calgary this past month to seat for the Fundamentals of Engineerng (FE) with is a prerequisite for Engineering licensing/Registration by APEGA in Alberta. Glad to inform the house that I passed the FE Mechanical Exam.

My academic credentials were reviewed/evaluated by APEGA and I was advised to sit for the FE Exam and the National Professional Practice Exam. A Foreign degree holder is required to do the FE exams if his/her degreee is not from either Canada, USA, Europe or Japan/Korea.

You can access the APEGA website using www.APEGA.ca . To register for the FE exam, you must have pre-qualification done by APEGA who forward your particulars ( Name, degree details) to the exam provider NCEES. You can access NCEES via this link http://ncees.org/supplemental-pages/my-ncees/.

Please let me know if you need any assistance during this process. I would be very glad to help.

Stay Blessed

ofonzo
Click to expand...

Good
 
You must log in or register to reply here.

Similar threads

P
PFL - MISREPRESENTATION - NOT MENTIONING COMMON LAW
Replies
10
Views
152
Canadian Experience Class
canuck78
C