HI, what are your details?I recently got rejected for express entry under cec because I ofcource chose the wrong NOC. Can anyone suggest good immigration lawyers in Toronto I could contact that will not be very expensive. I have lost the confidence in myself to apply on my own now.
You need a better consultation but it has to be in Toronto?I am on PGWP that expires in August next year. I had received my AOR December 13, 2018 and was rejected June 13, 2019. The reason for my rejection was as below
I have now completed the assessment of your application for a permanent resident visa as a member of the Canadian Experience Class and have determined that you do not meet the requirements for immigration to Canada. According to the Immigration and Refugee Protection Regulations, applicants in the Canadian Experience Class are assessed on the basis of the pass/fail requirements set out in subsection R87.1(2). The assessment of these criteria determines whether a worker with Canadian experience will be able to become economically established in Canada. The criteria are:
· temporary resident status during the qualifying period of work experience in Canada,
· meeting the minimum language proficiency threshold in either English or French, and
· qualifying Canadian skilled work experience.
Your application was assessed based on the occupation(s) which you identified as part of your skilled work experience in Canada: August 2017 until application date: Engineer-in-Training under NOC 2131. I am not satisfied that you meet the skilled work experience requirement for the following reasons: In support of your work experience with Company, you provided a letter that described your duties performed that do not accurately reflect the duties as outlined in NOC 2131 of the 2016 National Occupational Classification matrix for an Engineer-in-Training, NOC 2131 is specifically for "Civil Engineers". From the information provided, I am not satisfied that you performed the duties under NOC 2131 (Civil Engineers) as declared in your express entry profile. Therefore, your Canadian work experience has been rejected. For this reasons, I am not satisfied that you have completed at least one year of full-time (or equivalent part-time) work in a NOC 0, A or B occupation in Canada within the three years preceding your application date as required under section 87.1(2) of the Regulations. Subsection 11(1) of the Act states that a foreign national must, before entering Canada, apply to an officer for a visa or for any other document required by the Regulations. The visa or document may be issued if, following an examination, the officer is satisfied that the foreign national is not inadmissible and meets the requirements of this Act.
The thing is I was worried about this even when I was applying. . When I had initially applied I was confused between to NOC codes that closely matched to what I do and since I was applying on my own I relied on what I read online and selected from the two which ended up being the wrong choice. I just would like to know how I can proceed from this and What would be the most helpful solution for me. I do not have a fortune to pay to an immigration lawyer but I also do not wanted to get kicked out of the country.
I hope you guys can provide some useful contacts or solutions
I am applicant for Canada work permit neede, and i have Experience of industrial electrician 8 years present now , pleaHI, what are your details?
Sorry to hear this news. Can you please post your reference letter here if possible ? Next thing , Immigration consultants also are always not sure with exact NOC. All you have to do is provide letter to them and they will just apply for you. You are engineer. You should research looking your job responsibilities to the one posted in ESDC.I am on PGWP that expires in August next year. I had received my AOR December 13, 2018 and was rejected June 13, 2019. The reason for my rejection was as below
I have now completed the assessment of your application for a permanent resident visa as a member of the Canadian Experience Class and have determined that you do not meet the requirements for immigration to Canada. According to the Immigration and Refugee Protection Regulations, applicants in the Canadian Experience Class are assessed on the basis of the pass/fail requirements set out in subsection R87.1(2). The assessment of these criteria determines whether a worker with Canadian experience will be able to become economically established in Canada. The criteria are:
· temporary resident status during the qualifying period of work experience in Canada,
· meeting the minimum language proficiency threshold in either English or French, and
· qualifying Canadian skilled work experience.
Your application was assessed based on the occupation(s) which you identified as part of your skilled work experience in Canada: August 2017 until application date: Engineer-in-Training under NOC 2131. I am not satisfied that you meet the skilled work experience requirement for the following reasons: In support of your work experience with Company, you provided a letter that described your duties performed that do not accurately reflect the duties as outlined in NOC 2131 of the 2016 National Occupational Classification matrix for an Engineer-in-Training, NOC 2131 is specifically for "Civil Engineers". From the information provided, I am not satisfied that you performed the duties under NOC 2131 (Civil Engineers) as declared in your express entry profile. Therefore, your Canadian work experience has been rejected. For this reasons, I am not satisfied that you have completed at least one year of full-time (or equivalent part-time) work in a NOC 0, A or B occupation in Canada within the three years preceding your application date as required under section 87.1(2) of the Regulations. Subsection 11(1) of the Act states that a foreign national must, before entering Canada, apply to an officer for a visa or for any other document required by the Regulations. The visa or document may be issued if, following an examination, the officer is satisfied that the foreign national is not inadmissible and meets the requirements of this Act.
The thing is I was worried about this even when I was applying. . When I had initially applied I was confused between to NOC codes that closely matched to what I do and since I was applying on my own I relied on what I read online and selected from the two which ended up being the wrong choice. I just would like to know how I can proceed from this and What would be the most helpful solution for me. I do not have a fortune to pay to an immigration lawyer but I also do not wanted to get kicked out of the country.
I hope you guys can provide some useful contacts or solutions
I am applicant for Canada work permit neede, and i have Experience of industrial electrician 8 years present now , please contract to me this is my WhatsApp number 0060167692717HI, what are your details?
Battista Smith Migration Law Group ( Pablo Irribarra ).I recently got rejected for express entry under cec because I ofcource chose the wrong NOC. Can anyone suggest good immigration lawyers in Toronto I could contact that will not be very expensive. I have lost the confidence in myself to apply on my own now.
I am wondering, since december 2018 until june 2019 while your application being processed, didnt you order a GCMS note to get more details about your eligibility? Even didnt you call IRCC at least to make sure your application is in the safe side? Would like to hear you back. Regarding having a lawyer, it could help by choosing you your right NOC, however, from your detailed message i realised that you are an electric engineer while your NOC was for civil engineer?!
You need to apply again and select the right NOC!
I think I prooved that I am not a smart engineer. Here is the letter i was provided by my company.Sorry to hear this news. Can you please post your reference letter here if possible ? Next thing , Immigration consultants also are always not sure with exact NOC. All you have to do is provide letter to them and they will just apply for you. You are engineer. You should research looking your job responsibilities to the one posted in ESDC.
You have what you have now. Get yourself up, apply for new application, and use this forum to find people in your field to prepare an excellent reference letter and choose the accurate NOC. as long as this was the only issue then you have nothing more to worry. Good luck.I assumed thats the normal processing time that is why i stupidly didnt ask or inquire. I thought I've spent over 6 years going to college for civil engineering technology and then University for a degree in civil they can't be that in considerate. I worker as an Engineer in training in a Geotechnical company not an electrical engineer. The hr said the reference letter he provided is the reference letter he has given to other employees who applied for this and they got their pr. Only issue is I chose wrong noc. Should have stuck to a junior level.
Yes, the job description is a better match with NOC 2231...I assumed thats the normal processing time that is why i stupidly didnt ask or inquire. I thought I've spent over 6 years going to college for civil engineering technology and then University for a degree in civil they can't be that in considerate. I worker as an Engineer in training in a Geotechnical company not an electrical engineer. The hr said the reference letter he provided is the reference letter he has given to other employees who applied for this and they got their pr. Only issue is I chose wrong noc. Should have stuck to a junior level.